hey guys i have a few parts for grabs
aode trans call me for details. the thing is built like a brick sh1t house but started slipping. no big deal just needs a clutch pack.
brand new clutch fork and to bearing for a t5 in a 94-95 mustang.
30$
used flexplate for aode trans on a 302 (came off a 95 gt)
30$
upr max cross subframe connectors 50$ brand new
stock aode shifter 20$
gt40p heads. one is brand new bare head and the other is off an explorer and comes with valves but no springs. the springs on gt40p's are useless anyway. the heads have alot of port work done to them but need to be finished. one of the heads is done exept for the chamber polish. the other head is pretty much done being ported but needs polishing. a few hours behind a die grinder coping the head i already have done, then a nice valve job and your ready to go. 175$
extended studs for mustangs 3" long 1/2-20 threads .594 knurl size. 15$ brand new. 10 studs
ford 3.27 ring and pinion gear
87 t bird chassis 200$ take it.... front frame rail is rusting by were the k member meats the frame. car is sitting on the ground. no body no rear end. its going to the junk yard if it doesnt sell.
2 racing seats. they are black acp seats. my dogs got into one of them and took a corner of foam out of it. will need to be re upholstered. 150 bucks you can have both of them.
248 912 8701 craig. call me any time.
aode trans call me for details. the thing is built like a brick sh1t house but started slipping. no big deal just needs a clutch pack.
brand new clutch fork and to bearing for a t5 in a 94-95 mustang.
30$
used flexplate for aode trans on a 302 (came off a 95 gt)
30$
upr max cross subframe connectors 50$ brand new
stock aode shifter 20$
gt40p heads. one is brand new bare head and the other is off an explorer and comes with valves but no springs. the springs on gt40p's are useless anyway. the heads have alot of port work done to them but need to be finished. one of the heads is done exept for the chamber polish. the other head is pretty much done being ported but needs polishing. a few hours behind a die grinder coping the head i already have done, then a nice valve job and your ready to go. 175$
extended studs for mustangs 3" long 1/2-20 threads .594 knurl size. 15$ brand new. 10 studs
ford 3.27 ring and pinion gear
87 t bird chassis 200$ take it.... front frame rail is rusting by were the k member meats the frame. car is sitting on the ground. no body no rear end. its going to the junk yard if it doesnt sell.
2 racing seats. they are black acp seats. my dogs got into one of them and took a corner of foam out of it. will need to be re upholstered. 150 bucks you can have both of them.
248 912 8701 craig. call me any time.
Last edited:
