PAUL WILEY
Forum Member
Hooker Super Comp long tube headers look like new, 3 bolt flange removed for slip fit exhaust. 3" straight pipe with Dyno Max Bullets and dumps. Fits stock hangers. Also a little rip in one of the pipes, No big deal. $400
McLeod bell housing for T-5 and Tremec, It has a lot of grindind on it for better exhaust fit and other cool stuff also. $100
Victor 5.0 EFI intake, worked by Ron Sharp, coating on upper has been striped off. I will throw in extra gaskets also.$500 obo
80 MM Holley T-Body and EGR delete plate, linkage has been ground on for clearance of valve covers.I can get a pic if needed. $175 obo
Hurst shifter for T-5 just the base. $100 obo
T-trim kit:
Driver side mounting kit
V-1 T-trim / race model head unit
50 mm cog pulleys 73 30/32 and belt
custom aluminum tubing for inlet and discharge
mondo race bypass valve
SCT model #BA2800 mass air meter and harness for fox body conversion
96 lbs injectors
Pro-M low impedance injector driver
Only has Dyno time and a hand full of passes. I planed to race it in the NMCA Street Race class put planes have changed. Car made just over 700rwhp and 630ish torque. Blower made 26 lbs. of boost. Very nice kit and fit great.
I can sell with out injectors , inj. driver and mass air for $3000 or $3700 for every thing. See pics.
I have a few BRAND NEW still in the packaging part from my S-trim kit.
bypass valve. $50
Complete inlet piping with air filter and cover plastic and cleaning kit for air filter.$110
bracket for accessory idler pull. $20 two of them.
3.47, 8 rib blower pulley and 6.87" Crank Pulley Assembly, 8-Rib, 6" Accessory Drive. both for $125.
T-rex fuel pump kit still in box all wiring and brackets.$125
Chrome radiator hose piece.$50
Other small pieces also ask I might have them. I can Email pics.
I will be back in Warren from July 5-7 and I can bring any of this stuff with me if you want pics I can email them.
Make me some offers....
McLeod bell housing for T-5 and Tremec, It has a lot of grindind on it for better exhaust fit and other cool stuff also. $100
Victor 5.0 EFI intake, worked by Ron Sharp, coating on upper has been striped off. I will throw in extra gaskets also.$500 obo
80 MM Holley T-Body and EGR delete plate, linkage has been ground on for clearance of valve covers.I can get a pic if needed. $175 obo
Hurst shifter for T-5 just the base. $100 obo
T-trim kit:
Driver side mounting kit
V-1 T-trim / race model head unit
50 mm cog pulleys 73 30/32 and belt
custom aluminum tubing for inlet and discharge
mondo race bypass valve
SCT model #BA2800 mass air meter and harness for fox body conversion
96 lbs injectors
Pro-M low impedance injector driver
Only has Dyno time and a hand full of passes. I planed to race it in the NMCA Street Race class put planes have changed. Car made just over 700rwhp and 630ish torque. Blower made 26 lbs. of boost. Very nice kit and fit great.
I can sell with out injectors , inj. driver and mass air for $3000 or $3700 for every thing. See pics.
I have a few BRAND NEW still in the packaging part from my S-trim kit.
bypass valve. $50
Complete inlet piping with air filter and cover plastic and cleaning kit for air filter.$110
bracket for accessory idler pull. $20 two of them.
3.47, 8 rib blower pulley and 6.87" Crank Pulley Assembly, 8-Rib, 6" Accessory Drive. both for $125.
T-rex fuel pump kit still in box all wiring and brackets.$125
Chrome radiator hose piece.$50
Other small pieces also ask I might have them. I can Email pics.
I will be back in Warren from July 5-7 and I can bring any of this stuff with me if you want pics I can email them.
Make me some offers....
Last edited:
