Ford Focus- Blower motor problem

[uluz2a6]

2000 Ford Forcus 2.0(?)

Blower only works on HI (speed 4). Inop on speeds 1-3.

A/C works (speed 4 only). Fuses are ok. Cabin Airfilter was replaced. Hot/cold works, ducts work.

and the HVAC resistor was replaced.

But problem still exists...

HELP.

 

[The Big Cheese]

2000 Ford Focus 2.0(?)

Blower only works on HI (speed 4). Inop on speeds 1-3.

A/C works (speed 4 only). Fuses are ok. Cabin Airfilter was replaced. Hot/cold works, ducts work.

and the HVAC resistor was replaced.

But problem still exists...

HELP.

(as the music starts playing)
HAVE YOU DRIVEN A FORD LATELY!!!:_slide_:



speed control switch....

 

[Sean124]

Try replacing the blower motor resistor first. They go bad alot on those cars. Unles your telling me the HVAC resistor is the blower motor resistor. If you in fact already replace the blower motor resistor then its time to investigate the switch.

Sean

2000 Ford Forcus 2.0(?)

Blower only works on HI (speed 4). Inop on speeds 1-3.

A/C works (speed 4 only). Fuses are ok. Cabin Airfilter was replaced. Hot/cold works, ducts work.

and the HVAC resistor was replaced.

But problem still exists...

HELP.

 

[uluz2a6]

Try replacing the blower motor resistor first. They go bad alot on those cars. Unles your telling me the HVAC resistor is the blower motor resistor. If you in fact already replace the blower motor resistor then its time to investigate the switch.

Sean

I Replaced the blower motor resistor and the problem is still there.

Have you seen any Ford Focus's with the blowe switch going bad?

 

[ReiKo]

Yes... I have been selling them like hott cakes...

Your switch went bad...

Standard Part #
HS-347

 

[adrianglock]

The only thing that would make it work is to replace some parts like the blower motor, might also want to check the wiring too.
________________________________________________
Blower Control Switch/Blower Motor/Blower Motor Resistor
Blower Regulator/Blower Switch Knob