Kryp2nitE
Club Member
1974 charger project
all body work done minus maybe a spot or two to sand, prime and paint
underside POR-15'd but could probably use some more in the nooks and such
originally 318/904 but that is long gone (to another board member)
i have a 440 and trans that will both need to be gone through
440: 30 over with approx 3k miles on it
Forged TRW Slugs
Worked open chamber heads (not sure on sizes they came this way)
Torker Intake
850 VS Holley minus choke
engine was originally pulled cuz it spun a bearing so i got the crank cut 10 under and have all new bearings
also comes with engine-swaps.com swap kit so it will bolt in
727 Trans: came out of a 66 newport and is disassembled, comes with rebuild Kit
8 1/4 rear end has original 2.7x gear with new bearings at the end of the housing - comes with additional 8 3/4 but will need to be gone thru with new axles (also came out of the Newport)
i think i have a cone style sure grip and 4.56 gears for the 8 3/4
comes with 15x10 rear rims with N50-15 rubber and a set of old crager S/S rims to roll around on
front brakes are seized and car comes with new front calipers, rotors, pads, rubber lines (at the end) probably some more parts that i cant think of at the moment
Pros: Great Solid Car, with a lot of the work done and a lot of parts are here
Cons: engine compartment needs attention, sanding, etc; drive train needs assembling; car is a project so it still needs parts
$1800 would really get me ahead on my bills
but im open to offers as well as trades on something i can drive daily
pics to follow
PM me on here, or email me at [email protected]
586 604 5135 is my cell as well
all body work done minus maybe a spot or two to sand, prime and paint
underside POR-15'd but could probably use some more in the nooks and such
originally 318/904 but that is long gone (to another board member)
i have a 440 and trans that will both need to be gone through
440: 30 over with approx 3k miles on it
Forged TRW Slugs
Worked open chamber heads (not sure on sizes they came this way)
Torker Intake
850 VS Holley minus choke
engine was originally pulled cuz it spun a bearing so i got the crank cut 10 under and have all new bearings
also comes with engine-swaps.com swap kit so it will bolt in
727 Trans: came out of a 66 newport and is disassembled, comes with rebuild Kit
8 1/4 rear end has original 2.7x gear with new bearings at the end of the housing - comes with additional 8 3/4 but will need to be gone thru with new axles (also came out of the Newport)
i think i have a cone style sure grip and 4.56 gears for the 8 3/4
comes with 15x10 rear rims with N50-15 rubber and a set of old crager S/S rims to roll around on
front brakes are seized and car comes with new front calipers, rotors, pads, rubber lines (at the end) probably some more parts that i cant think of at the moment
Pros: Great Solid Car, with a lot of the work done and a lot of parts are here
Cons: engine compartment needs attention, sanding, etc; drive train needs assembling; car is a project so it still needs parts
$1800 would really get me ahead on my bills
but im open to offers as well as trades on something i can drive daily
pics to follow
PM me on here, or email me at [email protected]
586 604 5135 is my cell as well
