fogger questions

G

ghostchevy

Forum Member
i was thinking of a wilson or nitrious works single stage fogger kit. what what is every one using and pro and cons of them. this is on a all aluminum 457ci sbc and 15* heads and sheet metal intake.


just wanted everybodys opinions
 
Last edited:
try the nitrous guys on Yellowbullet.com. Alot of really good nitrous tunners to help you out.


ghostchevy said:
i was thinking of a wilson or nitrious works single stage fogger kit. what what is every one using and pro and cons of them. this is on a all aluminum 447ci sbc and 15* heads and sheet metal intake.


just wanted everybodys opinions
Click to expand...
 
ghostchevy said:
i was thinking of a wilson or nitrious works single stage fogger kit. what what is every one using and pro and cons of them. this is on a all aluminum 457ci sbc and 15* heads and sheet metal intake.


just wanted everybodys opinions
Click to expand...

i have tried a lot of different brands, and nothing beats nos. really like there stuff, very user friendly to tune. elderbrocks new e2 and e3 nossels are really good too, and use basic nos jetting an and tuneups. with a 15 degree head, you will be timing sencitve, so short 330 passes and watch the ground strap till its right. im using elebrock e2 and e3 this years. really love the old nos a and b stuff. they hit real hard!
 
4.25 stroke 6.125 rod, im using a dart little m block i can post pics if i can put post more than 1 at a time....it only let me post 1 then it says im at my limit???
 
ghostchevy said:
4.25 stroke 6.125 rod, im using a dart little m block i can post pics if i can put post more than 1 at a time....it only let me post 1 then it says im at my limit???
Click to expand...


Host them thru photobucket or similar.

I know of a 472 cubic inch small block chevy running around.. :gr_grin:
 
will do, i got alot of pics...... do i just put the link in here then or will they show in a thread.....im not all that computer illeteriate.
 
wow. is that the max bore on that block? i was thinking of doing a all motor sbc when my big block lets go. whats the bore on it? also whats your piston compression height?
 
4.160 bore. the motor is 14.5:1 over all compression. i had to take .040 off teh deck height for a clean up and deck overall height.
 
You must log in or register to reply here.
Back
Top