fill/drain plugs for a 9" rear

[jdustu]

I want to weld a couple of plugs into my 9" before I put it in the Buick, any idea where I could pic them up on the eastside? Or even where I could order them from(plug and bung)? I might be able to dig something up to use, but I'd like to do something like this:

 

[BB71Mopar]

S&W race car.

http://www.swracecars.com/

Go to catalog
than hardware
then Weld Bungs

on that page there will be filler caps and drains.

http://summitracing.com/parts/MOR-85283/
http://www.jegs.com/i/Moroso/710/85280/10002/-1
http://www.jegs.com/i/JEGS/555/60136/10002/-1

 

[Pwraddr]

http://www.markwilliams.com/chassisCaps.aspx?CategoryID=164

 

[jdustu]

S&W race car.

http://www.swracecars.com/

Go to catalog
than hardware
then Weld Bungs

on that page there will be filler caps and drains.

http://summitracing.com/parts/MOR-85283/
http://www.jegs.com/i/Moroso/710/85280/10002/-1
http://www.jegs.com/i/JEGS/555/60136/10002/-1

Sweet, thanks man.

 

[bigg]

DONT PUT A DRAIN IN THE BOTTOM !!!!!!!!!!!!!!!


it gets in the way when you jack up the rear...



i put one in and hate it!

 

[jdustu]

DONT PUT A DRAIN IN THE BOTTOM !!!!!!!!!!!!!!!


it gets in the way when you jack up the rear...



i put one in and hate it!

Naw, I'm gonna set it just to the side.

 

[bigg]

ill dig up a pic of mine.........its a pain

 

[bigg]

its in a bad spot....

 

[jdustu]

Oh yeah, that sucks. Being able to jack the rear is definitely at the top of my mind, I'll have it out of the way.

 

[prostreet377]

Did you try DTS on groesbeck?

Tom

:thumbsup:

 

[STOCK GT]

DONT PUT A DRAIN IN THE BOTTOM !!!!!!!!!!!!!!!


it gets in the way when you jack up the rear...



i put one in and hate it!

I put mine on the bottom and havent had Any Probs.
I have a Hoist though :thumbsup:

 

[TWOBEERS]

The drain should be at the bottom. When you weld in the bung, have them weld in a short piece of tube around it for a shield.