slideways
Club Member
Ok so im jus runnin a little feeler thread here to see if anyone would even be intersted. Heres what i got
2001 blazer 110,000 miles
2dr
2wd
4.3
automatic
Black w/charcoal interior
Mod List.
Drivetrain
AEM brute force cai
Trick flow tbs
Clutch fan removed in favor of 16" eletric ran off a thermostat
Gm 3:73 gears with s-truck locker
Custom catback w/ edelbrock sdt muffler and borla dual after burner tip in black
Suspension
2" DJM drop spindles
3" DJM drop springs
3.5" DJM angled drop blocks
Smallest leaf pulled in back
Belltech nitro drop shocks all around
All the nesseccary grinding and brake line flipping done to make the drop parts work
18" zeniks with 245/45/18 coopers (need replaced)
Stock 15" wheels with 235/55/15 BFG radial T/A's
Paint + Body
Aftermarket sonoma/jimmy hood
Shaved antenna
Shaved tailgate-IN PRIME
Shaved hood squirters
Smoothed and painted door handles
Smoothed and painted quater window trim
Paint matched front grille
Rear bumper extension shavers/custom fabbed roll pan-IN PRIME
The whole truck has been repainted with the exception of the roof, Tailgate, Roll pan
5% tint on front side windows
50% on new windsheild
Smoothed and painted dash bezel. door handle bezels, and window switch bezels in black
Tinted headlights and tailights
Maitnence
In the last 20,000 Miles i have replaced
All 4 ball joints
Sway bar endlink
Tie rods
Alignment
Trans filter/fluid
Coolant flush
New radiator
Rear brake- Pads, rotors, and calipers
Carrier bearing
Wheel bearing+seals
Pinion bearing and seals
The bad-
Needs front brakes
Needs both abs sensors
Needs a pcm reflash for 3:73's
Roll pan need to be finished mounted or fiberglassed into the extension shavers and painted
tailgate needs painted
roof could use paint (removed roof rack fill and smooth bolt holes and a few small dents)
The 18"s need new tires no tread/choppy
Lookin maybe for maybe $5,000 obo if theres any interst Ive got a ton of pics ill get up shortly
2001 blazer 110,000 miles
2dr
2wd
4.3
automatic
Black w/charcoal interior
Mod List.
Drivetrain
AEM brute force cai
Trick flow tbs
Clutch fan removed in favor of 16" eletric ran off a thermostat
Gm 3:73 gears with s-truck locker
Custom catback w/ edelbrock sdt muffler and borla dual after burner tip in black
Suspension
2" DJM drop spindles
3" DJM drop springs
3.5" DJM angled drop blocks
Smallest leaf pulled in back
Belltech nitro drop shocks all around
All the nesseccary grinding and brake line flipping done to make the drop parts work
18" zeniks with 245/45/18 coopers (need replaced)
Stock 15" wheels with 235/55/15 BFG radial T/A's
Paint + Body
Aftermarket sonoma/jimmy hood
Shaved antenna
Shaved tailgate-IN PRIME
Shaved hood squirters
Smoothed and painted door handles
Smoothed and painted quater window trim
Paint matched front grille
Rear bumper extension shavers/custom fabbed roll pan-IN PRIME
The whole truck has been repainted with the exception of the roof, Tailgate, Roll pan
5% tint on front side windows
50% on new windsheild
Smoothed and painted dash bezel. door handle bezels, and window switch bezels in black
Tinted headlights and tailights
Maitnence
In the last 20,000 Miles i have replaced
All 4 ball joints
Sway bar endlink
Tie rods
Alignment
Trans filter/fluid
Coolant flush
New radiator
Rear brake- Pads, rotors, and calipers
Carrier bearing
Wheel bearing+seals
Pinion bearing and seals
The bad-
Needs front brakes
Needs both abs sensors
Needs a pcm reflash for 3:73's
Roll pan need to be finished mounted or fiberglassed into the extension shavers and painted
tailgate needs painted
roof could use paint (removed roof rack fill and smooth bolt holes and a few small dents)
The 18"s need new tires no tread/choppy
Lookin maybe for maybe $5,000 obo if theres any interst Ive got a ton of pics ill get up shortly
Last edited: