Dooger
Forum Member
Wanted to put a feeler out there to see if anyone has interest in my current motor since I'm building a new set up. This is not a fire sale, I will be looking at putting this on the market in about a month or two. My car will be heading to my engine builder for a new power plant built for boost. Looking to sell from intake to pan with stock fuel rails and Lucas 42lb injectors, will consider selling as a short block but prefer intake to pan. I did just add new Flowtech 1 5/8 3" collector ceramic long tubes also. Would like to get $2,800 intake to pan or $3,000 with headers.
I bought the car last year with this motor, guy had the car for 15 years just tooling around town and street use. More of a H/C/I set up. I'm looking to build a more powerful motor with more strength for boost so going with a Boss Block fresh build. My current motor has about 20K miles from rebuild from the past owner. He freshened it up and added the below parts. Motor runs great, no smoke or odd noises, no leaks. Last owner had the car dyno tuned and put down 310rwhp 289lb tq with the 5 speed. Now has a built AODE. Please let me know if any interest, best way to reach me is [email protected]. Thanks Doug
I can email walk around and running video to interested buyers
Engine:
-Stock roller block balanced rotating assembly 306, compression 9.5-1
-TRW Forged pistons/rings
-Stock rods
-Stock crank
- ARP hardware on connecting rods, main caps and head bolts
-Anderson N41 Cam - 222/232 .544/.544 w/1.7 rocker 110 106
-Crane Blue 1.7 pedestal rockers
-Edelbrock Performer RPM heads O-ringed (head specs are 2.02/1.60 valves)
-Edelbrock Performer RPM II intake
- Flowtech Ceramic Coated 1 5/8” primary/3” collector Long Tube Headers
-Lucas 42lb injectors
-Hi flow water pump
I bought the car last year with this motor, guy had the car for 15 years just tooling around town and street use. More of a H/C/I set up. I'm looking to build a more powerful motor with more strength for boost so going with a Boss Block fresh build. My current motor has about 20K miles from rebuild from the past owner. He freshened it up and added the below parts. Motor runs great, no smoke or odd noises, no leaks. Last owner had the car dyno tuned and put down 310rwhp 289lb tq with the 5 speed. Now has a built AODE. Please let me know if any interest, best way to reach me is [email protected]. Thanks Doug
I can email walk around and running video to interested buyers
Engine:
-Stock roller block balanced rotating assembly 306, compression 9.5-1
-TRW Forged pistons/rings
-Stock rods
-Stock crank
- ARP hardware on connecting rods, main caps and head bolts
-Anderson N41 Cam - 222/232 .544/.544 w/1.7 rocker 110 106
-Crane Blue 1.7 pedestal rockers
-Edelbrock Performer RPM heads O-ringed (head specs are 2.02/1.60 valves)
-Edelbrock Performer RPM II intake
- Flowtech Ceramic Coated 1 5/8” primary/3” collector Long Tube Headers
-Lucas 42lb injectors
-Hi flow water pump
Last edited:
