>>>>>>>EVERYONE LOOKY HERE<<<<<<<<

igotaneed4speed

igotaneed4speed

Club Member
I've done a lil digging and not to happy with what i found and feel i've been lied to..




..............................................................................................

I was looking for a 351w a while back and dave posted this response to my thread.

foxbodydave said:
i also have a 351 non roller shortblock...trw forged pistons, new stock truck crank and new stock rods.... it does have a crower cam and a timing chain set. the shortblock has less than 20 miles on it. ran just long enough to break in. $600 bucks or ill trade for a good running complete or long block 302 and possibly an e cam if you got it. pm me for pics and more details
Click to expand...

http://www.motownmuscle.com/forums/showthread.php?t=30634


He is claming this motor has fordged trw's in it.. the motor i have does not.. but yet its the same one.. Someone was lying....

............................................................................................


In this thread he says he WILL BE putting this 351w in his car.
he was asking help on how to adjust rockers.. you should know this or been able to get help with you Dad being a engine builder.. or so you told me on the phone.

http://www.motownmuscle.com/forums/showthread.php?t=30643


............................................................................................
in this thread he talks about building a 351w with 12.5 to one so on and so forth..

http://www.motownmuscle.com/forums/showthread.php?t=31585

But a day later in a new thread its changed to 13 to one And speaks of running nitrous..
http://www.motownmuscle.com/forums/showthread.php?t=31709


Which one is it? im not sure how changed you mind in 24 hrs on what compression and what not..

.......................................................................................................

Once again in this thread he speaks of puttin nitrous on his motor..

http://www.motownmuscle.com/forums/showthread.php?t=31747

....................................................................................................

In this thread he says he has a 347 kit now and will be assembling it..

But when asked what kit he says it has diamond pistons and links a pn number for pistons for a 306?
How can you no ttell the difference theres an inch diffrence in wrist pin height and the skirts are way shorter..

Also when you order a roating assembly kit for a 347 they dont send you 306 pistons...Someone was lying again.. .

http://www.motownmuscle.com/forums/showthread.php?t=32529

also in that thread its made clear that he has no clue what the diffrence between a solid and hydralic roller is.. you should not be assembling a engine with out basic knowledge of parts..

In there he mentions his heads being epoxyed? Why would you expoy a head?
The only thing i've seen it used for is for smoothin transitions from small window intakes to large window heads so you dont have a shelf step.. Or for repairs..
................................................................................................

http://www.motownmuscle.com/forums/showthread.php?t=32668

This wouldnt have by any chance been a 351w? granite you do kinda mention it was a 302 in the last post you made.. but it could explain what happend to the motor i have..

.....................................................................................................
http://www.motownmuscle.com/forums/showthread.php?t=33924

In this thread blackbird is asking for parts to get things together to put the 351 in his car.. Foxbodydave offers parts he has for a 351w swap.. even though he told me on the phone he has never put it in his car..
.................................................................................................

http://www.motownmuscle.com/forums/showthread.php?t=34373

here he is selling some heads with bend valves but offers to regrind the seats and install new valves for the buyer.. Do you know how to do this? you dont even know the diffence between a hydralic and solid cam....
..................................................................................................
http://www.motownmuscle.com/forums/showthread.php?t=34527

In this post he is asking what it will cost to build up a decent 351
And States he and his dad will be assembling it.. Why did alternative put the one together that i have and not you guys?


You told me on the phone your dad has a boring machine... I wonder if you guys put the motor together i have and FUBBARED IT UP becuase you dont know what your doing and the result is what i got..

Also I will be calling alternative in the moring to find out if they remember anything about this motor. I know my local machine shop keeps block number and casting number records for return issues when they do machine and assembly work.. I wonder if alternative does?

......................................................................................................
http://www.motownmuscle.com/forums/showthread.php?t=34605

In this he is asking about using a roller in a non-roller block..

Whats interesting to me is on the second page he mentions his dad selling him the 69 351w block he has at that time.. but he had just traded a 74 351w block to blackbird not to long before.. Why would he trade a complete motor just to pick up another block and start over.. EXSPECALY since this was a FRESH JUST BROKEN IN SHORT BLOCK.. That he traded...? ? ?

Maybe becuase he knew it was junk.....?:bored:


...........................................................................................

http://www.motownmuscle.com/forums/showthread.php?t=35362

In this thread someone is looking for a shop to have some import work done..

Dave mentions that they should come to his shop? Would this be then one where your dad has the boring machine .. maybe the place you guys assembled the motor that i have?

................................................................................................

http://www.motownmuscle.com/forums/showthread.php?t=31657

In this thread he is looking for yet another 351w block? I thought your dad gave you a 69 351w block? Also if you want so many why did you off a FRESH ONLY BROKE IN SHORT BLOCK>?


he also makes mention of once again spraying this motor... adding to my therory he sprayed this motor i have and caused the pistons to expanded tightening up the top end..
............................................................................................

http://www.motownmuscle.com/forums/showthread.php?t=35613

In this thread just days before i made my posts about the paper weight i had recently traded for, He corrects black bird on saying the pistons are hyper and not forged... but yet in previous post in other threads he say they were forged..

.................................................................................................

http://www.motownmuscle.com/forums/showthread.php?t=36017

This thread is the last post he made .. on the 25 th
I post my pictures and started my thread on the 28 th..

If you look at his poist history.. every since he signed up he has been on here and posting at least every otherday or so..

SO all of a sudden he doesnt have a comp after i post this? Sounds like someone was and or is avoding this..

Even yet he still has managed to log in numerous times since then according to his profile.. but yet he dont have a comp...?

BULLSHIT...:pow:
 
Also.. a lil more fun

Looking the picture below.. For a engine that has only break-in time on it and nothing else its sure does have alot of carbon build up between the top and bottom comp. rings..

351w007.jpg



Also after further tearing in to the motor.. the lifters have dimpels worn into the bottom of them significantly! A sign of high milage or lack of lube..

Alos the timing chain has a drasic amount of varnish coating on it.. also a sign of high milage or lack of lube..

not the best pic but you can see part of the chain..

351w005.jpg



I have looked over the pistons several times and noticed that there is whitness marks of valves hitting three of the pistons.. i will try to get picks tonight as the ones i took this moring didnt turn out good enough to see them.. also one of the pistons has signs of detionation along with what appears to be coolant sludge in the ring glands...

More pictures to come..



Basicly all in all I call Bullshit on foxbody about what he told me... I want some answers and I want the truth..

I tried being nice but this has just really pissed me off with what happend to josh car and the whole motor deal..

Granite there is no proof dave did it but.. for some reason it points that way..

Maybe dave will stop being a lil BITCH and stop avoding my posts and STOP feeding me a line of shit... I really hate doing shit like this.. but your making me have to do this and its just going to get worse from here out now.. :nono:


A phone call has been made to my laywer
 
Last edited:
If anyone can give me a last name, address, anything they can about foxbodydave it would be greatly apprechiated.. as my laywer needs to make contact.
 
Your the man Derrick. Awesome reasearch Everyone on here wants his head. It all points to him. None of this should of happened. This kid is in deeppp sh$#.
 
isn't pure84gt his buddy? correct me if i'm wrong
Pure84GTT said:
he doesnt have a computer, I had his phone number so i called him for you guys.

his reponce is as follows, if Igotaneed4speed wants to straighten this out have him call me. the 351 was in running condition when it was sold to blackbird


586-943-0523
Click to expand...
 
Blackbirdws6zzz said:
"10669 lakepointe detroit mi. 48224
my cell phone is broken right now so if you need to call me call 313-527-9428"

Thats one of his PM's to me. This can help us.
Click to expand...

That's why I save my PM's.
 
we should put derrick on the channel 2 investigative team....:icon_mrgr damn good work, i was looking through his last posts but didn't go that in depth. +1 for the research and the bullshit you have had to deal with....
 
You must log in or register to reply here.
Back
Top