Engine opinion

[BigWheelinBubba]

I think so. I haven't looked at it in a while, but it's cast aluminum and it's one of the largest brackets I've ever seen. I bought it about 3 yrs ago and still haven't gotten to the project. Someday.

Might be a b-body bracket.

 

[Dr. Teeth]

Might be a b-body bracket.

Doesn't really matter. It's going in a Nova, which has a 3rd gen front suspension clip, with a Chevette rack and pinion. It's all one-off, so what's one more mish mash?

 

[dave89iroc]

Might be a b-body bracket.

same as the f-body bracket, just spaced out from the engine farther, as loang as it is not the y-body stuff, he should be good

 

[DarkoStoj]

i think that 350 is begging for 10lbs of boost on a blowthrough carb

 

[beertestr]

I think so. I haven't looked at it in a while, but it's cast aluminum and it's one of the largest brackets I've ever seen. I bought it about 3 yrs ago and still haven't gotten to the project. Someday.

Shoot a pic of it. There are 3 different brackets, all of them are relatively big, but I think the Vette one is the biggest. To make things even MORE fun, the crank hubs and dampers are different between the 3.

B-car - PS pump bolts to a plate, which bolts to the bracket. bracket mounts on pass side of engine

F-car - pump just bolts to the bracket, the two bolts in the middle IIRC.
bracket mounts on pass side of engine

Y-car - bracket mounts on drivers side.