StockNotch
Forum Member
Parts are located in Kalamazoo
I will not part out the turbo or engine kits unless all other parts are sold at the same time.
Turbo kit - $SOLD
Redjack manifold, divided T3.Twin 44mm TiAL MVR wastegate provisions (one was replaced (made room for larger radiator) to fit a 38mm MVS but, have the piece to go back to 44mm MVR).
TiAL MVR wastegate (new)
HX-40 Pro, 70lb/min turbo, divided T3 exhaust housing with 4" v-band outlet
Garrett based Slowboy Racing "Race" front mount.
Intercooler piping
4" downpipe for v-band flange
Road Race Engineering 4" intake
2.3l Stroker kit (ready for the machine shop) - $1000:
2.4 liter crank
Virgin 6bolt block (includes pan, pick up, front case and oil pump)
Wiesco 9:1 pistons, coated by Dart Machine on tops and sides.
Eagle Rods
ARP L19 head studs
ARP main studs
Kiggly girdle
ACL Race bearings
Trend wrist pins
Balance shaft elimination kit
Cometic gasket kit
Jay Racing alternator relocation kit
Misc. parts:
Magnus 7 bolt intake manifold - $400
Magnus oil filter with assembly tool (new) -$100
Forced Performance, FP4R cams - $350
2g DSM carbon hood, OEM style, needs painted or re-cleared - SOLD
14" (2) DSM steel wheels with Mickey Thompson ET Drags, 26x8.5 (lots of life left) - $200
2g DSM intake manifold - $20
1g DSM throttle body - $40
1g DSM bypass valve, uncrushed - $20
2 eBay 44mm waste gates with dump tubes - $100 for the pair
2g DSM Fluidyne radiator - $250
I will not part out the turbo or engine kits unless all other parts are sold at the same time.
Turbo kit - $SOLD
Redjack manifold, divided T3.Twin 44mm TiAL MVR wastegate provisions (one was replaced (made room for larger radiator) to fit a 38mm MVS but, have the piece to go back to 44mm MVR).
TiAL MVR wastegate (new)
HX-40 Pro, 70lb/min turbo, divided T3 exhaust housing with 4" v-band outlet
Garrett based Slowboy Racing "Race" front mount.
Intercooler piping
4" downpipe for v-band flange
Road Race Engineering 4" intake
2.3l Stroker kit (ready for the machine shop) - $1000:
2.4 liter crank
Virgin 6bolt block (includes pan, pick up, front case and oil pump)
Wiesco 9:1 pistons, coated by Dart Machine on tops and sides.
Eagle Rods
ARP L19 head studs
ARP main studs
Kiggly girdle
ACL Race bearings
Trend wrist pins
Balance shaft elimination kit
Cometic gasket kit
Jay Racing alternator relocation kit
Misc. parts:
Magnus 7 bolt intake manifold - $400
Magnus oil filter with assembly tool (new) -$100
Forced Performance, FP4R cams - $350
2g DSM carbon hood, OEM style, needs painted or re-cleared - SOLD
14" (2) DSM steel wheels with Mickey Thompson ET Drags, 26x8.5 (lots of life left) - $200
2g DSM intake manifold - $20
1g DSM throttle body - $40
1g DSM bypass valve, uncrushed - $20
2 eBay 44mm waste gates with dump tubes - $100 for the pair
2g DSM Fluidyne radiator - $250
Last edited:
