GT Trooper
Club Member
Holley Carburetor for sale 8896:
Great condition gas carb from built for my setup by Pro Systems. Was on an 87 notch with 533CI motor. Car went 9.60's and cruised Woodward all week during the dream cruise. It's a very nice piece, powder coated black and red. Selling as I'm moving my drivetrain to a Cobra kit car and need to tone it down. The technician build sheet will be included with the carb. Asking $675.00 obo. 313-623-9226
I will include the specs I sent to Pro Systems for your viewing.
I currenty have: 1050 HP
Type of Racing/Use: Drag Race and Street Use
Vehicle Weight: 3200
Engine Brand: Ford
Engine Cubic Inches: 533
Compression Ratio: 12:1
Intake Manifold Brand: Edelbrock
Intake Manifold Bolt Pattern: Single Dominator
Cylinder Head Type: Trickflow Street
Intake Valve Diameter: 2.19
Exhaust Valve Diameter: 1.74
Engine HP (or Estimate): 600
Nitrous HP - (SUBTRACT Engine HP from this figure.):
Launch RPM: 3600
Track Length: 1/4 mile
Fuel Type: 110
Fuel Pump: Electric
Fuel Pump GPH rating:
Transmission Type: Transbrake 3 speed
Suspension Type: Factory Suspension
Tire Size: 28 inch
Cylinder Heads Ported (If heads have been flowed, include flow #'s in comments box): Yes
Mufflers: Yes
Type of Camshaft:
Camshaft - Intake Duration @ .050: 272
Camshaft - Exhaust Duration @ .050: 278
Camshaft - Intake Lift at valve: 690
Camshaft - Exhaust Lift at Valve: 635
Lobe Separation: 112
Header Diameter: 2"
Comments: Flow #'s:
@500 lift 333/222
@600 lift 360/236
@700 lift 375/249
Great condition gas carb from built for my setup by Pro Systems. Was on an 87 notch with 533CI motor. Car went 9.60's and cruised Woodward all week during the dream cruise. It's a very nice piece, powder coated black and red. Selling as I'm moving my drivetrain to a Cobra kit car and need to tone it down. The technician build sheet will be included with the carb. Asking $675.00 obo. 313-623-9226
I will include the specs I sent to Pro Systems for your viewing.
I currenty have: 1050 HP
Type of Racing/Use: Drag Race and Street Use
Vehicle Weight: 3200
Engine Brand: Ford
Engine Cubic Inches: 533
Compression Ratio: 12:1
Intake Manifold Brand: Edelbrock
Intake Manifold Bolt Pattern: Single Dominator
Cylinder Head Type: Trickflow Street
Intake Valve Diameter: 2.19
Exhaust Valve Diameter: 1.74
Engine HP (or Estimate): 600
Nitrous HP - (SUBTRACT Engine HP from this figure.):
Launch RPM: 3600
Track Length: 1/4 mile
Fuel Type: 110
Fuel Pump: Electric
Fuel Pump GPH rating:
Transmission Type: Transbrake 3 speed
Suspension Type: Factory Suspension
Tire Size: 28 inch
Cylinder Heads Ported (If heads have been flowed, include flow #'s in comments box): Yes
Mufflers: Yes
Type of Camshaft:
Camshaft - Intake Duration @ .050: 272
Camshaft - Exhaust Duration @ .050: 278
Camshaft - Intake Lift at valve: 690
Camshaft - Exhaust Lift at Valve: 635
Lobe Separation: 112
Header Diameter: 2"
Comments: Flow #'s:
@500 lift 333/222
@600 lift 360/236
@700 lift 375/249
Last edited:
