Do they make a 1350 joint pinion flange with 2.5" mustang bolt pattern?

Does anyone make a replacement heavy duty yoke flange with teh 3" bolt pattern? I would assume it would be overkill on that small pattern as to why you can't find it? Why are you wanting to go so large? Guys are running well into the 8's if not 7's on teh standard size. I would be looking to replace the flange not the yoke adapter. I think the 1350 joint is too large for that pattern anyway. Might be wrong it's been a while since i seen a 1350 joint though.
 
I guess I could switch to a different u joint, but I already have a 1350 in my driveshaft and I needed to get the flange anyway
 
I guess I could switch to a different u joint, but I already have a 1350 in my driveshaft and I needed to get the flange anyway

I would look into replacing the pinion flange then to accept the 3", i'm sure someone has to make one. Good luck either way. But just keep in mind sometimes reinventing the wheel is more costly then a new driveshaft!
 
well I was really trying to get away from having to remove the pinion flange. Ill just swap to a 1350 yoke like my Fox was if thats the case.

I didnt want to have to take the axle apart if I didnt have to as I know nothing about setting the preload or anything like that.
 
Well, apparently nobody makes a pinion flange for a mustang and a 1350 u joint, thanks for the link Joe. Scott is gonna come install it tomorrow or Thursday, depending on how fast summit will ship it
 
i believe u can use a f150 truck flange from 8.8 ,it looks the same as a mustang flange but is bigger............but in my opinion if ur going that far just put a good one like the strange or something and do it like a gm.........
 
i believe u can use a f150 truck flange from 8.8 ,it looks the same as a mustang flange but is bigger............but in my opinion if ur going that far just put a good one like the strange or something and do it like a gm.........

That's exactly what I did. Scott from DLS came out to my shop tonight and swapped my stock flange out for a Moser GM style yoke. Excellent service BTW, thanks Scott
 
Back
Top