crane ignition help please

stroked10

stroked10

Forum Member
ok i ahve the crane hi-6 igniton bot and coil i bought it new last year and ran it.no problems what so ever ok now i have a trans brake and nitrous do i need a 2 step to get this to work its best?and if so can i hook a 2 step up to a crane ignition?.
 
well yea i wanna be able to hold the pedal to the floor the whole time and still be able to dile in my launch to like 3500 and when i let go of the button the n20 comes on and then my shift limiter be at 8500.can you do that or no i dont even know.
 
N20tbrake.jpg
 
some 2 steps have an output for a relay control(nitrous and stuff)
not sure how to wire one without that control
 
no.
for a 2 step you would add a relay between the WOT switch and noid/relay.
the output of the 2step would control the added relay(n2o disable relay)until the transbrake/2 step is released
relay
30-comes from the wot switch
87a-to nitrous relay
85-+ from arm/momentary switch for 2 step/transbrake
86-ground
 
Last edited:
wow this all very confusing.that diagram bigg sent how would that work?is that just showing how to hook everything up without a 2 step?.and does anyone know if i can hook a msd 2 step up to my crane ignition?.
 
You must log in or register to reply here.
Back
Top