Mustang5oh
Forum Member
I am listing this for a friend and if you need more info, pm me for his number. He needs to get rid of this asap for financial troubles...
NO TRADES
I have a well built 349 c.i. engine that's been collecting dust in the garage for a project I'll probably never complete. I need to free up some cash so I decided this needs to go.
Specs-
Block- 4.040 bore FMS A-4 4 bolt main
Crankshaft- Trickflow 3.400 forged steel
Pistons- Ross 12:1
Rings- Low tension for vacuum pump
Rods- 2.100 Eagle 5.400 steel H-Beam
Oil Pump- Standard Volume
Oil Pan- Canton 7 quart
Water Pump- Mesier electric
Camshaft- Cammotion solid roller (not exact 274 - 282 .780 lift 110 lobe sep)
Lifters- Comp Cams solid roller
Timing Chain- FRPP
Cylinder Heads- Trickflow Tiwsted Wedge R w/ ported chambers, pockets and raised intake port roof
Rocker Arms- Comp Cams 1.6 Magnum
Pushrods- Trend 3/8 ... not 100% sure on brand though
Valve Springs- 1.625 od triple (need replacing)
Valves- Ferrea Stainless Steel
Intake- Edelbrock Victor Jr. Ported
Carb- 4150 Holley modified by Pro Systems
Distributor- MSD
ARP bolts and studs throughout engine.
Compression of approx. 13:1
Engine made 628 peak hp @ 7500 rpm and averages around 550 hp
Also comes with brand new in box 1 3/4 primary / 3 1/2 inch collector Kooks Kustom Headers, Be Cool Radiator and Spal fan.
Engine has approx. 50 passes on it so will need new springs.
ASKING $6,000 O.B.O ... NO TRADES
I want this gone fast so the first thing close to $6,000 takes the whole package.
NO TRADES
I have a well built 349 c.i. engine that's been collecting dust in the garage for a project I'll probably never complete. I need to free up some cash so I decided this needs to go.
Specs-
Block- 4.040 bore FMS A-4 4 bolt main
Crankshaft- Trickflow 3.400 forged steel
Pistons- Ross 12:1
Rings- Low tension for vacuum pump
Rods- 2.100 Eagle 5.400 steel H-Beam
Oil Pump- Standard Volume
Oil Pan- Canton 7 quart
Water Pump- Mesier electric
Camshaft- Cammotion solid roller (not exact 274 - 282 .780 lift 110 lobe sep)
Lifters- Comp Cams solid roller
Timing Chain- FRPP
Cylinder Heads- Trickflow Tiwsted Wedge R w/ ported chambers, pockets and raised intake port roof
Rocker Arms- Comp Cams 1.6 Magnum
Pushrods- Trend 3/8 ... not 100% sure on brand though
Valve Springs- 1.625 od triple (need replacing)
Valves- Ferrea Stainless Steel
Intake- Edelbrock Victor Jr. Ported
Carb- 4150 Holley modified by Pro Systems
Distributor- MSD
ARP bolts and studs throughout engine.
Compression of approx. 13:1
Engine made 628 peak hp @ 7500 rpm and averages around 550 hp
Also comes with brand new in box 1 3/4 primary / 3 1/2 inch collector Kooks Kustom Headers, Be Cool Radiator and Spal fan.
Engine has approx. 50 passes on it so will need new springs.
ASKING $6,000 O.B.O ... NO TRADES
I want this gone fast so the first thing close to $6,000 takes the whole package.
