2MANYMUSTANGS
Club Member
I have a used set of Comp Cams Big Mutha Thumr cams with the phase limiters for sale. They are for a 2005 - 2010 4.6 3-valve. They have very little miles on them. I installed them last summer. I am pulling them out along with some of the other go-fast stuff from this car as I am going to put the car up for sale. The car sounds awesome with these cams (can't stress how awesome) and runs awesome too but the car will be more marketable without the lopy idle and screaming exhaust note. The car made 354 HP to the wheels with these cams. I have a dyno sheet I will post along with a video of the car running with these cams. Did I mention how awesome it sounds with these cams?
I am looking to get $550 for the cams and limiters. Together they were almost $1000 new.
Send me a PM if you are interested.
You may need to copy and paste the link to get the video to work. Oh, and disregard the torque reading on the dyno sheet. Something wasn't reading right with Lidio's dyno when he was doing the tuning work.
[video]https://docs.google.com/file/d/0BxwN1kTgXRBTcFhFUXJVc0c1TG8/edit[/video]
I am looking to get $550 for the cams and limiters. Together they were almost $1000 new.
Send me a PM if you are interested.
You may need to copy and paste the link to get the video to work. Oh, and disregard the torque reading on the dyno sheet. Something wasn't reading right with Lidio's dyno when he was doing the tuning work.
[video]https://docs.google.com/file/d/0BxwN1kTgXRBTcFhFUXJVc0c1TG8/edit[/video]
Last edited: