Coil over springs for a sn95

[KENNEBELL2.6]

What front coilover springs would you recommend for a 96 mustang. The car has an aluminum block, fiberglass hood, tube k-member, but it has a Kenne Bell blower that pack on a few pounds and the battery is still up front. I drive it short distances on the street and would like to have it preform well at the track (dragstrip).

 

[87droptop]

What front coilover springs would you recommend for a 96 mustang. The car has an aluminum block, fiberglass hood, tube k-member, but it has a Kenne Bell blower that pack on a few pounds and the battery is still up front. I drive it short distances on the street and would like to have it preform well at the track (dragstrip).

I have a 94 cobra with a windsor in it, and all tubular from suspension and k member. I have strange adjustables, with 14" coils and 175lb rate Sits great

 

[SuperStang90]

I happen to have a pair of 14-175's for sale if you end up going that route....cheap

 

[MentalMisfit]

Dave over at TeamZ ended up putting 12" 150#'s in my car with an aluminum headed Windsor block. But it wasn't a street car.