chevelle dave

NOSBigShot

NOSBigShot

Club Member
not bad for a heavy car that sat in the garage since the late 80s,then one day he decides i want to finish my car ,crazy how that works.
[ame="http://www.youtube.com/watch?v=8pJceCnlvOM"]YouTube - Dave Burke Chevelle 10-18-08[/ame]
 
ya maybe paint someday too...by the way The 555 is at the machine shop ...watch out next year looking for 9 on the motor...hows the stang coming ...thought you wanted to do the rear gear swap..
 
chevelledave said:
ya maybe paint someday too...by the way The 555 is at the machine shop ...watch out next year looking for 9 on the motor...hows the stang coming ...thought you wanted to do the rear gear swap..
Click to expand...

the motors out i gotta pull the rearend out and bring it over.
 
cool give a call ...thanks for posting the videos to...how did you like the last run ...that was the run i sprayed and only went a 10th quicker ...
 
I left off idle ..no trans brake...bottle pressure was only bout 700 psi... i was thinking bout swapping in the 4.10 's but think I will wait till spring and make a pass with brake and just run it to a 1000 ft to much conv slip to run it out the back door.
 
chevelledave said:
I left off idle ..no trans brake...bottle pressure was only bout 700 psi... i was thinking bout swapping in the 4.10 's but think I will wait till spring and make a pass with brake and just run it to a 1000 ft to much conv slip to run it out the back door.
Click to expand...

just turn the spray off in high gear.
 
yeah I wanna try a few things before the big motor goes in...converter then gears ... and some chassis tweaks ...then in goes the big bullet...
 
yeah Im new to the spray....car went 10.77 @ 122 on the motor 10.65 @ 127 on the spray breaking up pretty bad from about 1\2 track on... i will get it sorted out in the spring with NOSbigshots help.
 
You must log in or register to reply here.
Back
Top