Exhaust E-vac kit, brand new it was 64, give me $30.
Innovative MSBC-1, needs solenoids, you can purchase form grainger for less than $100. - $200
94-98 Mustang gauge pod, has oil press and Boost press, looks like there is some oil in the gauge but worked great when I had it, both mechanical. $50.
NOS bottle with blanket and brackets, $100.
MSD ARC 7761 module with CAN expander set up, over $523 just for the MSD, will take $400 for both, both and brand new never plugged in.
Megasquirt with harness, used it for a injector test stand I built, $200
Microquirt ECM with harness, brand new $200
05 LS2 6.0 rods and piston, 1 bad rod, only 30,000 on shortblock, make offer.
Mustang 8.8 uppers, heim joints, $80.
110 lb springs, $50.
Edelbrock Performer intake with Quadrajet carb, $80.
2 Innovate Wideband O2 gauges with sensors, $100 a piece. These are still on my boat, will pull them off when I go pick up the boat from storage next week.
SBF 8.2 deck Trickflow pushrods. $40
I am located around Toledo, work in Dearborn. Not making barely any money on this, so not looking to drive far to meet up. You can e-mail me @ [email protected] will get your quickest response!
Here is a picture of all the stuff.
Innovative MSBC-1, needs solenoids, you can purchase form grainger for less than $100. - $200
94-98 Mustang gauge pod, has oil press and Boost press, looks like there is some oil in the gauge but worked great when I had it, both mechanical. $50.
NOS bottle with blanket and brackets, $100.
MSD ARC 7761 module with CAN expander set up, over $523 just for the MSD, will take $400 for both, both and brand new never plugged in.
Megasquirt with harness, used it for a injector test stand I built, $200
Microquirt ECM with harness, brand new $200
05 LS2 6.0 rods and piston, 1 bad rod, only 30,000 on shortblock, make offer.
Mustang 8.8 uppers, heim joints, $80.
110 lb springs, $50.
Edelbrock Performer intake with Quadrajet carb, $80.
2 Innovate Wideband O2 gauges with sensors, $100 a piece. These are still on my boat, will pull them off when I go pick up the boat from storage next week.
SBF 8.2 deck Trickflow pushrods. $40
I am located around Toledo, work in Dearborn. Not making barely any money on this, so not looking to drive far to meet up. You can e-mail me @ [email protected] will get your quickest response!
Here is a picture of all the stuff.
Last edited:
