beater drag cars

[Shadow X]

that would be sweet

 

[DarkoStoj]

just look around and try to find someones abandoned project. that way you can get into something real cheap with 1/2 the parts and work done. You should do a $600 s400 turbo and your own piping.

here is some insparation, 9sec 1/4 mile times with a $100 chevy 350 with 1.72 valve heads :lmao:

its a lot of reading, but lots of good info

http://www.theturboforums.com/smf/index.php?topic=61219.0

 

[91Notch]

I love my Bird
Ron

BTW I happen to know where to get T-BIRD specific suspension parts

I like it :thumbsup:

 

[torchd]

awesome never knew this thread blew up...

current setup is a 1986 ae86 corrolla (rwd)
13b with a 6 port street port getting built right now.
450cfm holley 4 barrell
5 speed is in the garage but thinkign about getting a c4 with a stall for now.

goal is 11's. will probably spray it to get there.

i decided to go light as possible plus i only have like 500$ into it right now...

 

[black88coupe]

just look around and try to find someones abandoned project. that way you can get into something real cheap with 1/2 the parts and work done. You should do a $600 s400 turbo and your own piping.

here is some insparation, 9sec 1/4 mile times with a $100 chevy 350 with 1.72 valve heads :lmao:

its a lot of reading, but lots of good info

http://www.theturboforums.com/smf/index.php?topic=61219.0

This car was featured either in Hot Rod or CC awhile back. Very cool!

 

[mikesfastss]

i have a nice beater g body cutlass with a cage and a 456 rear end and gutted 2 hell manual gear box ide be willing to get off cheap or possibly trade 4 some mustang capri parts