GPowrie
Forum Member
Engine is apart to be freshened currently. I can offer to assemble it for an additional cost if desired. Basic rundown on it is:
Dart 10.2 big m block
Dart pro1 345 heads
Lunati Pro Series 4.250 crank
Eangle 4.250 crank also as a spare
Grp rods
New Diamond pistons with stainless rings, gas ported
Will also come with used JE pistons
Jesel belt drive
Comp solid roller cam
Super victor intake converted to Efi
90mm accufab throttle body
Msd dist
Msd crank trigger
Mid plate and motor plate for Mustang
moroso aluminum pan
Titon oil pump
Ati balancer
JW Sfi flexplate
Cast milodon valve covers
Forward facing turbo headers, mild steel and not the nicest but usable
Almost everything is there minus an elbow and turbo plumbing. This is a high dollar engine. Will sell for $8000 with everything I have for it. I also have a 114mm forsale that was going on this engine. I will work on pics in the next few days, assuming it does not sell before that.
Dart 10.2 big m block
Dart pro1 345 heads
Lunati Pro Series 4.250 crank
Eangle 4.250 crank also as a spare
Grp rods
New Diamond pistons with stainless rings, gas ported
Will also come with used JE pistons
Jesel belt drive
Comp solid roller cam
Super victor intake converted to Efi
90mm accufab throttle body
Msd dist
Msd crank trigger
Mid plate and motor plate for Mustang
moroso aluminum pan
Titon oil pump
Ati balancer
JW Sfi flexplate
Cast milodon valve covers
Forward facing turbo headers, mild steel and not the nicest but usable
Almost everything is there minus an elbow and turbo plumbing. This is a high dollar engine. Will sell for $8000 with everything I have for it. I also have a 114mm forsale that was going on this engine. I will work on pics in the next few days, assuming it does not sell before that.
Last edited: