Balanced 306 SBF rotating asy with Ross pistons

[deadred]

Forged flat top for Twisted Wedge heads, ceramic top coat and graphite coated skirts (over $700 new). Currently have press pins (but have grooves for floating pin locks) on truck rods which were properly resized when fitted with ARP bolts. Crank is -0.010 and needs polished only. These parts were used about 6k miles over an 8 year period. I haven't had time to mic the piston diameters but you can see the graphite is still on the skirts.

I want to sell along with this a standard bore 1971 Mexican block; no main caps but has ARP main stud kit.

$400 for everything. If you want to split it up we'll have to talk.

Located in Dearborn Hts. Call (248) 318-5558

 

[deadred]

Now on sale for $399 and a FREE FL-1A Motorcraft oil filter (while supply lasts)!

 

[dudek]

so to make sure i understand this correctly, all i need to complete this shortblock is main caps?

 

[deadred]

Yes, main caps would complete the "hard parts" and I'm guessing you know this (but just to be sure) it will need new rings, bearings and machine work (bored to fit the +.030 pistons and align bored for new main caps)

Thanks for looking.

 

[deadred]

Located in Dearborn Hts.

Call (248) 318-5558

 

[CobraSVT657]

compression on these pistons and can u send me pic of everything thx joe
[email protected]

 

[blk-sunshine]

compression on these pistons and can u send me pic of everything thx joe
[email protected]

Cheap, easy 10 second power...................with a blower, piece of cake. Makes a great competitor. GLWS.

 

[deadred]

Compression will be approx 9.5 to 1, depends on exact deck height, chamber size, gasket thickness, etc.

More pics below.

 

[CobraSVT657]

sent u a pm let me know if that will work thx joe