only backfires under high load?
how old are the cap/plug wires?
full tune up. check timing. Put some decent gas in it.
agreed
and when the cap and rotor are off, make sure the reluctor is tight to the shaft
Now that just sounds dirty!!!!
full tune up. check timing. Put some decent gas in it.
agreed
and when the cap and rotor are off, make sure the reluctor is tight to the shaft
Now that just sounds dirty!!!!
check for corrosion under the car too. The newer caps have vent and info with them about it
the real old caps would allow condesation to collect inside and cause corrosion