Any Motorcycle Mechs. Here?

66 chevelle

Club Member
My wife has a Honda Metropolitan II, scooter will not stay running, I changed fuel filter, took carb off and cleaned it, fuel pump is pulsing fuel, fuses are all good, changed plug. I don't know where else to look. Anyone know how to check the ECM? Thanks for any help.
 
I had a 2 cycle scooter with the same problem.. I was told to take out the Inlet needle out and stick a pin in the jet with carb cleaner.. I guess old gas was gumming up the hole, I put it back together and it ran like a champ.
Inlet needle is #30

10057269-00001.png
 
x2 , what he said , you can use a wire from like a wire brush or BBQ wire brush ( just 1 little strand ) and poke it threw and spray the hell out of it with carb cleaner , its a very small hole so dont go and shove anything big into it or else you will screw up the carb
 
Back
Top