Any Guys running KB 2.2's?

[OnyxSSS]

Just wanted to see who is out there with a Kenne BEll 2.2?? I am looking at getting one but have to change the intake so that I can run at least a 90mm TB.

I am looking at running it on my 6.0L, it has a custom discharge and uses factory injection and an added A2A IC.

A fellow SSS driver had a NON-IC unit run 11.99
so my goal of running in the 11's seems like it could be met fairly easy??
I am currently running 42lbs injectors so I would need to add some meth or get some big honking injectors.

Thoughts?

TIA
-joe

 

[Inkognigrow]

I went through 2 in 2 summers.. Seals went out in both of them Kenne bell charges 875 to rebuild them and not including the shipping to rancho cucomonga..

They wont hold 20- 21 psi for more then 1,000 street miles with out starting to use a ton of 50w oil... Id go with a whipple if you plan on running more then 16-17 psi

 

[OnyxSSS]

I was gonna keep the boost below 15psi. Was gonna try to set it up to run 10-11 for the street and maybe keep a smaller pully for the track.

I cant see dropping all the $$ for a tuebo then need all the BOV and WG...I could have this for the cost of my hotpipes?

thanks for the answer

 

[KENNEBELL2.6]

Im having great luck with mine no problems. I have a 2.6 tho. Also Sardeani on here has the same one and I dont think hes had any problems and his is a little bit more radical than mine.