99 blazer trans

[notch92408]

have 99 blazer 4x4 but the front diff and stuff is gone someone took out... now having problem with the transfer case its making a noise and stuff any way to bypass it????? please need some help with this 1 thank you

 

[Detroit Gearbox]

Have you checked the fluid level in the transfercase?
Are you sure the noise is from the transfercase?
If so, (and your sure its bad) you can pick up a good used one cheap on craigslist.
That would be your least expensive and simplest solution.

 

[dave89iroc]

did they put axle stubs in the front bearings????? the axle nut holds the preload on the bearings, they fail quick without them


and everything he ^ said

 

[notch92408]

yes frnt axles are back in !! and yes rich its cmn from trasnsfer case and how do u check the fuid on the transfer case??? it sometimes engages idk how??? and makes a like clicking noise??

 

[ShadowRuleZ]

I don't know how much is the same as the first gen, but I pulled the front diff out of a first gen for a few weeks and had to put stubs in the front spindles otherwise the wheels pretty much fell off. I made them out of a set of old axles.

 

[Billydroveit]

how do u check the fuid on the transfer case??

Same way you do a rear axle. Should be a plug in it on the side facing the rear. One on top, one on bottom. Fill/drain.