95 Stang

[V10Venom]

Bought some tbolt screws for valve covers
and some wire loom holders off craigslist.. for $5.00 Lol

Makes me understand why people like mustangs so much, parts are soooooooooooo cheap!

 

[95DetroitStang]

Update ::::: 03/24/2010

I got my headers... For a good price.
But they need some fabrication help!!
The one tube got crushed by the motor mount, so i hope they can be fixed...
ANY HELP WOULD BE GREATLY APPRECIATED !!!

 

[BigWheelinBubba]

PM sent.

 

[2004boss]

you could prolly weld a rod to the center of it, heat the tube with a torch and pull the dent out then just cut the rod off

 

[95DetroitStang]

2004boss! that is a great idea! +1 again :rockwoot:

 

[95DetroitStang]

hoping to have this thing done in the next week or :w00t:
Im not really rushing it.
But what needs to be done still....
______________________________________
Headers installed.
Headers fixed.
Rear end installed.
Trans mount installed.
Upper and lower intake installed.
H pipe fixed.

Not much, I could probably have it done by sunday lol
but I figure why rush? soo it should be running and driving by the the end of next week or early the week after

 

[black88coupe]

you could prolly weld a rod to the center of it, heat the tube with a torch and pull the dent out then just cut the rod off

X2. Take it over to Diamond or Reiters. Maybe they can help you out???

 

[95DetroitStang]

well my pops and I are gonna heat it up real good, and use a pry bar on the inside, if that doesnt work were gonna try the rod thing, if that doesnt work i mightt take it to diamond, or just fab something up myself.

 

[95DetroitStang]

Update::: 03/31/10
I got my MSD CAP & ROTOR

 

[95DetroitStang]

Update::: 03/31/10
Got my Poly Trans Mounttt.

 

[95DetroitStang]

Update:::: 03/31/10
I got my Ford Racing 9mm Wires & NGK V-Power Plugs
God these thhingsss are monsters.

 

[95DetroitStang]

Update::: 03/31/10
Just a quick little preview of the top end on.
Im antsy lol, nothing is bolted down, its just sitting there.
figured id take a pic.
lol

 

[The Man]

looks good...nice work and keep the pics coming.

 

[95DetroitStang]

started it up on friday --- ran beautiful
The new tach does wonders, my stock tach was about 600 rpms off.
I gotta take a video of the car because it sounds like it has a cam, unless all stock 5.0's sound like they do.

 

[95DetroitStang]

Updateeee ::::: 04/06/10

Fixed the headerss.

 

[95DetroitStang]

Updateee ::::: 04/06/10


Headers Get Prepped for paint.
And get painted with High Temp -- 1200 degree

 

[cobra tom]

sweet, projects are great, keep up the good work!

 

[greatwhiteLSC]

Did you bake the headers at all when painting them?

 

[black88coupe]

COOL!

 

[95DetroitStang]

no I didnt bake them, im hoping the high temp paint will set without the back,i sanded them down, I soaked them in mineral spirits, cleaned em with brake clean, so HOPEFULLY the paint will set.