'94 Firebird formula

A few of my friends have started calling the car "Johnny 5" I had to google who he was but i definitely see the resemblance lol
 
Ordered yesterday at 5:30, delivered today by 10am! The ones on the right are for the bird!
434d48b4a750c77657bceb663a181ea0.jpg




Sent from my iPhone using the shitter.
 
Thanks! So far only a little rubbing, i think i fixed it with a BFH but i also have some 10mm spacers on the way to give it some extra room.
 
I did a auto-x at Gratten Raceway on Labor Day. Was fun to push the car through some turns with a little more speed than most auto-x. Almost makes the price of doing a day on a road coarse worth the cost for me lol.
9a5239fe48bee085dfd8e821ef3d74e9.jpg

27f3511a31c8219f038c0f1f1f2ba21e.jpg

ba932b86018746e8d8e60cb22b8914d6.jpg
b714dcdb10142073e97265d3c966c0e4.jpg
ed7d18714df675ccce488ddc74439336.jpg
0e4fff7ce8a251b2a93bbbf79d901079.jpg

15e0f49161eaf90e0137bd9be04f5ce5.jpg

37cfe92493a9d5065efb4c57ecebfcd2.jpg



Sent from my iPhone using the shitter.
 
Just caught up to your last years' worth of updates... that car's come a long way and I really can appreciate the no frills all fun approach. :cool:
 
Thanks, it's been fun so far! Hopefully getting it tuned for the cam and spray soon. Hopefully add a turbo into the mix in the next couple winters.


Sent from my iPhone using Tapatalk
 
Dropped the car off yesterday to Weapon X Motorsports in Cincinnati for my friend to get it dialed in on the dyno this week. Went with a 150 shot for now since i'm still pulling off the rail for fuel, eventually I'll get all the stuff for a standalone fuel setup I can run some c16 in but i'm a cheap ass lol. I'm also ditching the 85mm MAF for a SD setup too.
 
Shitbird made 390/410 on a Mustang dyno. I'm very happy with those numbers for a cam only 5.3! He didn't have time to get the nitrous dialed in so that will be next on the agenda.
 
Did a few runs with a friend of mine who has a 2017 Chevy SS. It's stock other than a intake and drag radials. My car is still on street tires to try and prolong the 10 bolt lol. We also did some 40 rolls where I pulled about 2 cars but didn't film them.

 
Grabbed a driveshaft off FB Marketplace too, 3” aluminum. Previously went 9.90s so it should be plenty for my 13s lol
916841d4646e0a4e23d0211b21e8b651.jpg


Quick Performance F9 has been ordered with a Yukon center, can’t wait to have 4.10s instead of 2.73s lol
 
You must log in or register to reply here.
Back
Top