ThreeHonks
Forum Member
9 Second WS6 Partout - UMI Suspension - UPDATED PICS!!! 11/4/11
Please see post number #3 (below) for the remainder of parts available. Everything else is sold.
Here is my thread where I will be parting out the entire car over time and you can expect all parts to be listed in this thread to keep it simple and organized. The plan as of now, is to part out the car piece by piece and sell the car as a roller. If anyone is interested in the complete car please let me know ASAP before parts are taken off.
Below is a quick pic of the car from last month’s NO ET at Milan. I don’t want to rant about the car itself, but it is immaculate inside and out. No expense has been spared and no detail has been overlooked. I am not going to get any more specific about its E.T. or mph in this thread, the thread title says enough. I will be more specific with interested buyers of certain parts. I will say, however, that the car has exceeded my goals that I have set for it very easily. I do want to note that every modification on this car has been done by myself, I bought this car bone stock 3 years ago with under 50k miles. It currently has 62k miles.
Onto the parts list! (for now expect this to be very short, until I find time to add a lot of the stuff and think about it, but trust me, there are A LOT of parts)
NOTE: I have a lot of stuff to add still and will update this thread with pictures. Please give me some time as it is very large. Thanks! Prices do not include shipping.
The best way to reach me is by PM or even better- email [email protected]
Engine:
- Ai Solid Roller Top End Package - Advanced Induction 200cc CNC heads, 52cc chambers, Xceldyne Ti-17 Retainers and hardware, PSI springs, 3/8” chromoly pushrods, Morel Ultra Pro HIPPO lifters. (These are the best of the best components you can literally buy). Also includes Jesel shaft mount rocker system with custom head bolts and all hardware for the Jesel rockers. This entire setup was spec’d by Ai, they assembled the heads and out it all together. The cam is an Ai billet custom grind, I was asked by Ai to not to release cam specs. Specs will be shared to interested buyers. This is a top end package that just plain works! $3000 SOLD SOLD SOLD
- Ai Ported Intake Manifold – This has been 100% ported by Ai and the opening has been machined to accept a monoblade throttle body (other smaller throttle bodies will work as well). Powdercoated an awesome deep metallic red/maroon with chrome fins. $650 SOLD SOLD SOLD
- Holley 58mm Polished Throttle Body – Includes all sensors and fasteners - this thing is in perfect condition and polished to a mirror like shine. $250 SOLD SOLD SOLD
- Shortblock – Fully forged 355 cubic inch LT1. Has a forged 3.48” GM crank. Forged Scat rods with 3/8” ARP chromoly cap screws. Forged pistons. ARP hardware and precision machine work throughout. This will include the assembled shortblock, and oil pan. $1200 SOLD SOLD SOLD
- CSR Electric Water Pump – This is a CSR Billet water pump that is mounted in the stock housing. The housing has been powdercoated a metallic, hi-gloss silver. This includes the water pump housing with electric pump, a 160* thermostat, and the thermostat housing with hardware powdercoated the same color. $250
-42lb. SVO Ford Green Top Injectors – Set of 8 injectors in excellent shape. Not many miles on these at all. These have been flow matched as well and I believe I still have the flow match paperwork to go with them. $225 SOLD SOLD SOLD
- Low Mount Alternator Relocation – This is the kit from pcmforless.com. It’s a steel bracket and weighs almost nothing. This has been powdercoated in hi-gloss metallic silver. Comes with hardware and a basically brand new Gatorback belt. Does not include alternator. $80
- LT1 OEM Alternator AC Delco – This is NOT the original alternator on the car. I bought a new one because I wanted a clean look and my original was dirty over the years. This has approx 5000 miles on it. Genuine AC Delco unit. $100
Engine Management:
- Here is the EFI Connection 24x setup. Completely removes the opti and runs the car on an LS computer. This includes EVERYTHING you need to make this a complete bolt on application. It includes the complete engine harness (currently setup for a 4L60e, but can be easily change to a t56). Includes stock timing cover powdercoated metallic hi-gloss silver, 24x billet wheel, all sensors. This comes with a 2002 PCM and I can put a baseline tune on it for whoever buys this for their setup (as long as the engine is not pulled by the time this sells). This includes polished aluminum valve covers that the coils mount to and a set of truck coils. Also includes a set of custom MSD 8.5mm wires. Includes a Cloyes billet single roller timing chain. I might be missing something, but I am selling this in a way that it is 100% complete and you can install it all and go. Nothing is missing and you aren’t going to have to search for some misc part. $2000
Nitrous Kit:
- Just purchased this brand new about 2 months ago. Everything on this kit is all NX branded. This includes everything you need and all wiring. The solenoids are the NX Iceman “P” series. One of the highest flowing solenoids NX has ever made. Nitrous is rated to 500hp and the fuel is rated to 600hp IIRC. This is a dual shark nozzle kit. Includes NX bottle heater, N2O Outlet spare tire mounting bracket, N2O Outlet digital dual window switch featuring gear lockout, NX purge kit, various jets, pressure gauge, all various relys and fittings. EVERYTHING you need. Also has the upgraded 15 lb. bottle and the 4an braided black nylon “race” feed hose. $800 SOLD SOLD SOLD
Exhaust:
- Pacesetter Long Tube Headers – Long tube headers in excellent shape, these are the ceramic coated version. Will include premium aluminum percy’s “seal-4-good” gaskets with sale. $250 SOLD SOLD SOLD
- Custom 3” x pipe – This is a totally custom setup. This tucks up better than a y pipe! All piping is mandrel bent and it has bullet mufflers. Attaches simply with the rear seat bolts. Includes 3” stainless band clamps with sale. $250
- Percy’s Split Lock Header Fasteners – These are the locking header bolts. 12 point head for easy access with a simple allen head set screw in the center. $25 for the set.
Transmission:
- Prothane Poly Trans Mount – Black in color and basically brand new. Works on LS/LT cars with any transmission. Includes the grade 8 mounting stud and a few thick washers that I like to use. $15 SOLD SOLD SOLD
Wheels/Tires:
- As of now I want to sell the set of tires and wheels as a set of 4 and not break anything up. These are Racestar wheels. These are probably in better-than-new condition seeing how many times I have polished them! They are 15x3.75” fronts and 15x10” rear with 7.5” backspacing. The front tires are Mickey Thompson Sportsman 8 ply and the rears are Mickey Thompson 28x10.5S ET Drag. Tires are in almost new condition! $1250 for everything with lug nuts.
Please see post number #3 (below) for the remainder of parts available. Everything else is sold.
Here is my thread where I will be parting out the entire car over time and you can expect all parts to be listed in this thread to keep it simple and organized. The plan as of now, is to part out the car piece by piece and sell the car as a roller. If anyone is interested in the complete car please let me know ASAP before parts are taken off.
Below is a quick pic of the car from last month’s NO ET at Milan. I don’t want to rant about the car itself, but it is immaculate inside and out. No expense has been spared and no detail has been overlooked. I am not going to get any more specific about its E.T. or mph in this thread, the thread title says enough. I will be more specific with interested buyers of certain parts. I will say, however, that the car has exceeded my goals that I have set for it very easily. I do want to note that every modification on this car has been done by myself, I bought this car bone stock 3 years ago with under 50k miles. It currently has 62k miles.
Onto the parts list! (for now expect this to be very short, until I find time to add a lot of the stuff and think about it, but trust me, there are A LOT of parts)
NOTE: I have a lot of stuff to add still and will update this thread with pictures. Please give me some time as it is very large. Thanks! Prices do not include shipping.
The best way to reach me is by PM or even better- email [email protected]
Engine:
- Ai Solid Roller Top End Package - Advanced Induction 200cc CNC heads, 52cc chambers, Xceldyne Ti-17 Retainers and hardware, PSI springs, 3/8” chromoly pushrods, Morel Ultra Pro HIPPO lifters. (These are the best of the best components you can literally buy). Also includes Jesel shaft mount rocker system with custom head bolts and all hardware for the Jesel rockers. This entire setup was spec’d by Ai, they assembled the heads and out it all together. The cam is an Ai billet custom grind, I was asked by Ai to not to release cam specs. Specs will be shared to interested buyers. This is a top end package that just plain works! $3000 SOLD SOLD SOLD
- Ai Ported Intake Manifold – This has been 100% ported by Ai and the opening has been machined to accept a monoblade throttle body (other smaller throttle bodies will work as well). Powdercoated an awesome deep metallic red/maroon with chrome fins. $650 SOLD SOLD SOLD
- Holley 58mm Polished Throttle Body – Includes all sensors and fasteners - this thing is in perfect condition and polished to a mirror like shine. $250 SOLD SOLD SOLD
- Shortblock – Fully forged 355 cubic inch LT1. Has a forged 3.48” GM crank. Forged Scat rods with 3/8” ARP chromoly cap screws. Forged pistons. ARP hardware and precision machine work throughout. This will include the assembled shortblock, and oil pan. $1200 SOLD SOLD SOLD
- CSR Electric Water Pump – This is a CSR Billet water pump that is mounted in the stock housing. The housing has been powdercoated a metallic, hi-gloss silver. This includes the water pump housing with electric pump, a 160* thermostat, and the thermostat housing with hardware powdercoated the same color. $250
-42lb. SVO Ford Green Top Injectors – Set of 8 injectors in excellent shape. Not many miles on these at all. These have been flow matched as well and I believe I still have the flow match paperwork to go with them. $225 SOLD SOLD SOLD
- Low Mount Alternator Relocation – This is the kit from pcmforless.com. It’s a steel bracket and weighs almost nothing. This has been powdercoated in hi-gloss metallic silver. Comes with hardware and a basically brand new Gatorback belt. Does not include alternator. $80
- LT1 OEM Alternator AC Delco – This is NOT the original alternator on the car. I bought a new one because I wanted a clean look and my original was dirty over the years. This has approx 5000 miles on it. Genuine AC Delco unit. $100
Engine Management:
- Here is the EFI Connection 24x setup. Completely removes the opti and runs the car on an LS computer. This includes EVERYTHING you need to make this a complete bolt on application. It includes the complete engine harness (currently setup for a 4L60e, but can be easily change to a t56). Includes stock timing cover powdercoated metallic hi-gloss silver, 24x billet wheel, all sensors. This comes with a 2002 PCM and I can put a baseline tune on it for whoever buys this for their setup (as long as the engine is not pulled by the time this sells). This includes polished aluminum valve covers that the coils mount to and a set of truck coils. Also includes a set of custom MSD 8.5mm wires. Includes a Cloyes billet single roller timing chain. I might be missing something, but I am selling this in a way that it is 100% complete and you can install it all and go. Nothing is missing and you aren’t going to have to search for some misc part. $2000
Nitrous Kit:
- Just purchased this brand new about 2 months ago. Everything on this kit is all NX branded. This includes everything you need and all wiring. The solenoids are the NX Iceman “P” series. One of the highest flowing solenoids NX has ever made. Nitrous is rated to 500hp and the fuel is rated to 600hp IIRC. This is a dual shark nozzle kit. Includes NX bottle heater, N2O Outlet spare tire mounting bracket, N2O Outlet digital dual window switch featuring gear lockout, NX purge kit, various jets, pressure gauge, all various relys and fittings. EVERYTHING you need. Also has the upgraded 15 lb. bottle and the 4an braided black nylon “race” feed hose. $800 SOLD SOLD SOLD
Exhaust:
- Pacesetter Long Tube Headers – Long tube headers in excellent shape, these are the ceramic coated version. Will include premium aluminum percy’s “seal-4-good” gaskets with sale. $250 SOLD SOLD SOLD
- Custom 3” x pipe – This is a totally custom setup. This tucks up better than a y pipe! All piping is mandrel bent and it has bullet mufflers. Attaches simply with the rear seat bolts. Includes 3” stainless band clamps with sale. $250
- Percy’s Split Lock Header Fasteners – These are the locking header bolts. 12 point head for easy access with a simple allen head set screw in the center. $25 for the set.
Transmission:
- Prothane Poly Trans Mount – Black in color and basically brand new. Works on LS/LT cars with any transmission. Includes the grade 8 mounting stud and a few thick washers that I like to use. $15 SOLD SOLD SOLD
Wheels/Tires:
- As of now I want to sell the set of tires and wheels as a set of 4 and not break anything up. These are Racestar wheels. These are probably in better-than-new condition seeing how many times I have polished them! They are 15x3.75” fronts and 15x10” rear with 7.5” backspacing. The front tires are Mickey Thompson Sportsman 8 ply and the rears are Mickey Thompson 28x10.5S ET Drag. Tires are in almost new condition! $1250 for everything with lug nuts.
Last edited:
