GT Trooper
Club Member
87 Notch Roller F/S - Belleville, MI - SOLD
Selling my 87 Mustang Roller as I'm moving on to another project. Car is very solid and has the following:
-10 point tig welded cage
-through the floor sub-frame connectors
-4" cowl hood
-factory sumpted fuel tank (no pump or filters) has -10 supply line and -8 return (braided)
-4 lug Weld draglights rims. 15x3.5" and 15x10"
-Hoosier front runners and 28's (9inch) on the rear
-Granatelli adjustable upper control arms and Southside lowers
-Wolfe Racecraft anti roll bar
-8.8 rear axle, drum brakes, 3.73 gears, c-clip eliminators
-Strange 31 spline axles and spool (5/8 studs)
-Trickflow diff cover
-drive shaft loop
-QA adjustable coilovers front
-Lakewood 50/50 shocks rear
-tubular k-member will work with BB or SB
-Steeda caster camber plates
-full interior
-trunk shut off switch
-Flaming River steering rack
-Aluminum wing
Other than a few nicks here and there the car is solid and looks really good. Asking $3600.00 and will entertain reasonable offers.
Thanks.
Selling my 87 Mustang Roller as I'm moving on to another project. Car is very solid and has the following:
-10 point tig welded cage
-through the floor sub-frame connectors
-4" cowl hood
-factory sumpted fuel tank (no pump or filters) has -10 supply line and -8 return (braided)
-4 lug Weld draglights rims. 15x3.5" and 15x10"
-Hoosier front runners and 28's (9inch) on the rear
-Granatelli adjustable upper control arms and Southside lowers
-Wolfe Racecraft anti roll bar
-8.8 rear axle, drum brakes, 3.73 gears, c-clip eliminators
-Strange 31 spline axles and spool (5/8 studs)
-Trickflow diff cover
-drive shaft loop
-QA adjustable coilovers front
-Lakewood 50/50 shocks rear
-tubular k-member will work with BB or SB
-Steeda caster camber plates
-full interior
-trunk shut off switch
-Flaming River steering rack
-Aluminum wing
Other than a few nicks here and there the car is solid and looks really good. Asking $3600.00 and will entertain reasonable offers.
Thanks.
Attachments
Last edited:
