8.8 or 9" rearend for a '66 mustang.

[wikdsvt]

title covers it.

 

[mikesfastss]

Will a nine inch from a 72 mustang fit?if so I have one for 200

 

[1nine84GT]

I have a 8.8 with 5 lug disc set up from a Mark VII...... $100. I am In Westland.

 

[wikdsvt]

Outside Width Year Model
56.50 1969-1977 Maverick 8"
57.00 1974-1978 Mustang II 8"
57.25 1957-1959 Ford, Ranchero, Station Wagon
57.25 1965-1966 Mustang
58.00 1966-1977 Bronco
58.00 1964-1965 Falcon
58.00 1977-1981 Granada/Versailles
58.50 1977-1981 Versailles
59.25 1967-1970 Mustang, Fairlane, Comet, Cougar
60.00 1967 Cougar
60.00 1958-1960 Edsel
61.00 1964-1971 Ford Full Size
61.00 1949-1951 Mercury
61.25 1957-1972 Ford F-100 Pickup
61.25 1960-1964 Ford Full Size
61.25 1971-1973 Mustang
61.25 1967-1973 Torino, Ranchero, Fairlane
63.00 1970-1979 Ranchero & Torino
63.00 1972-1979 Ford Full Size & Intermediate
63.50 1967 Fairlane (Coil Springs)
65.25 1973-1986 Ford F-150 Pickup
65.25 1978-1986 Bronco
65.25 1973-1986 Ford Van 3/4 Ton
68.00 1972 Ford Van 3/4 Ton
69.25 1977-1986 Ford E-150 Van

 

[wikdsvt]

Will a nine inch from a 72 mustang fit?if so I have one for 200

Darn.. way too wide.

 

[wikdsvt]

I have a 8.8 with 5 lug disc set up from a Mark VII...... $100. I am In Westland.

Any idea the width? also, Does it have coil or leaf? (Im guessing coil)

 

[grr456]

I think I have just a bare 9" housing..Well, I am sure I have a bare housing, but I am not 100% positive it is the correct width, but I *think* it is. All of the 8" stuff will also fit. Really, really cheap for you...I can probably run it up to your office.

FWIW - I have a brand new SSBC disc brake kit for it, too...

Gary

 

[grr456]

The bare housing I have is 53.5" housing flange to housing flange. I think the above housing dimensions are with the axles, or axle flange to axle flange.

Gary