GPowrie
Forum Member
I have decided to tone down my project thus the entire engine combo is for sale. The motor is not assembled but most of the macining is done. The only parts I do not have for the engine is a cam and a timing set. Because the engine is not assembled yet some things can be changed to make the motor usabe for other clases, The heads can be milled to bring the motor up to about 13.6:1 if someone wanted to try to run it all motor or in a nitrous application(the parts in the motor would not be the gratest for an all motor app. but it would make plenty of power to keep up in the Milan heads up event). The heads are still at ET but should be done this week. I want to sell this as an entire setup as the oil pan set up makes it need the midplate set up I have as it runs a driver side starter and a chevy bellhousing and alot of the parts are spicific to this engine. Most of the parts are brand new but a couple parts are used, I will state which parts are used in the parts list. I have around $35,000 invested in this engine and associated parts, I would like to get $16,000 obo.
Parts List:
Dart 9.5 deck 4.124 bore block
Eagle 4" crank
MGP 6.250 Aluminum pro-mod rods
Diamond custom pistons
Billet Fabrications external wet sump oil pan
Peterson single stage wet sump oil pump
Moroso 4 vane vacuum pump(used)
MSD crank triger
MSD crank triger distributer
ATI dampener
JW The Wheel flexplate
Crank Mandrel
Power Master 12v race alternator
Blue Thunder 4.30 heads ported by ET Performance
Jesel rocker arms(used)
Jesel .875 tie bar lifters(used 2 passes)
Blue Thunder 2 piece 4500 Manifold w/fuel rails(not macined for injectors yet)
Wilson Manifolds 4500 to 105mm 100* rear facing elbow
AMP Sheet Metal valve covers
ARP head studs
Most all gaskets needed to complete
Tilton Starter
Skinny Kid Motor Plate Kit, includes adapter mid plate, front plate, and engine torque limiter
JW Ulta Bell powerglide to Chevy
I also have a box of misc. parts that goes with, includes tons of pushrods(new), couple sets of plug wires(1 used rest are new), tons of spark plugs(all new), oil filters(new), extra crank triger(used missing the pickup), and more that I can't think of right now.
Thanks, Greg
248-978-5721
Parts List:
Dart 9.5 deck 4.124 bore block
Eagle 4" crank
MGP 6.250 Aluminum pro-mod rods
Diamond custom pistons
Billet Fabrications external wet sump oil pan
Peterson single stage wet sump oil pump
Moroso 4 vane vacuum pump(used)
MSD crank triger
MSD crank triger distributer
ATI dampener
JW The Wheel flexplate
Crank Mandrel
Power Master 12v race alternator
Blue Thunder 4.30 heads ported by ET Performance
Jesel rocker arms(used)
Jesel .875 tie bar lifters(used 2 passes)
Blue Thunder 2 piece 4500 Manifold w/fuel rails(not macined for injectors yet)
Wilson Manifolds 4500 to 105mm 100* rear facing elbow
AMP Sheet Metal valve covers
ARP head studs
Most all gaskets needed to complete
Tilton Starter
Skinny Kid Motor Plate Kit, includes adapter mid plate, front plate, and engine torque limiter
JW Ulta Bell powerglide to Chevy
I also have a box of misc. parts that goes with, includes tons of pushrods(new), couple sets of plug wires(1 used rest are new), tons of spark plugs(all new), oil filters(new), extra crank triger(used missing the pickup), and more that I can't think of right now.
Thanks, Greg
248-978-5721
