deviate
Club Member
SOLD 408 stroked notch $4500 obo SOLD
SOLD
PENDING TRADE!!! for monday the 10th
[*]it has:[*]*5 lug conversion[*]*31 spline moser axles[*]*430 gear[*]*svo girdle[*]*has a spring, upper and lower control arm it looks like[*]built 408...was built at heads up performance , was told it made 544hp on engine dyno. the timing is overly retarded i believe in order to run 94 octane. vic jr intake, 10.5:1 compression, nitrous cam.[*]*MSD 6al[*]*holley or mallory FP (cant remember but its an intank)[*]*mallory fpr[*]*TCI c4..not manual valve but shifts firm and quick[*]*b&m pro ratchet shifter[*]*converter that flashes at 2k
it was the worst idea ever for me to buy a carberated car. it runs horriably rich at idle, and was told it is the power valve. its a holley 650dp with a pro-form center section.
the rockers need to be adjusted, and the oil pan gasket leaks a little puddle the size of a 50 cent peice.
the handles on the inside and outside of the driver door came off the bar that opens so the door skin needs to come off and get fixed.
car drives straight but wheel is cocked
missing misc interior peices
passanger window wont roll down
no hood
the car was a texas car and is immaculate other than the hood came up and the cowl peice in between the windshield and hood is a little fucked up.
SOLD
PENDING TRADE!!! for monday the 10th
[*]it has:[*]*5 lug conversion[*]*31 spline moser axles[*]*430 gear[*]*svo girdle[*]*has a spring, upper and lower control arm it looks like[*]built 408...was built at heads up performance , was told it made 544hp on engine dyno. the timing is overly retarded i believe in order to run 94 octane. vic jr intake, 10.5:1 compression, nitrous cam.[*]*MSD 6al[*]*holley or mallory FP (cant remember but its an intank)[*]*mallory fpr[*]*TCI c4..not manual valve but shifts firm and quick[*]*b&m pro ratchet shifter[*]*converter that flashes at 2k
it was the worst idea ever for me to buy a carberated car. it runs horriably rich at idle, and was told it is the power valve. its a holley 650dp with a pro-form center section.
the rockers need to be adjusted, and the oil pan gasket leaks a little puddle the size of a 50 cent peice.
the handles on the inside and outside of the driver door came off the bar that opens so the door skin needs to come off and get fixed.
car drives straight but wheel is cocked
missing misc interior peices
passanger window wont roll down
no hood
the car was a texas car and is immaculate other than the hood came up and the cowl peice in between the windshield and hood is a little fucked up.
Last edited:
