4 to 5 lug mustang conversion parts

jordanbmx

jordanbmx

Club Member
I have an 87 lx 4cy base. i want to convert the front to 5 lug for better wheel selection. i have the 5 lug 11" rotors already but from what i read those will not work with my spindles. so back to square one!
 
What are you looking to do? Street brakes or road race or auto cross or what? Or just doing it for larger wheel selection only?
 
Quick86 said:
What are you looking to do? Street brakes or road race or auto cross or what? Or just doing it for larger wheel selection only?
Click to expand...
its my street/drag car. Im mainly looking for 94+ spindles, rotors calipers and lines. But if i can get a set of v8 spindles for my rotors and calipers thats good aswell
 
If your looking for 5 lug conversion parts I have the front brakes, rotors, spindle and master cylinder if your interested.
 
If you want to use the 4 cylinder spindles you can get a set of 83-88 ranger 4 cylinder rotors. You will have to change the races but they can be use from the mustang rotors.
 
1nine84GT said:
If you want to use the 4 cylinder spindles you can get a set of 83-88 ranger 4 cylinder rotors. You will have to change the races but they can be use from the mustang rotors.
Click to expand...
Cool i think im gonna do that. Cheapest route by far aswell as brand new pieces
 
1nine84GT said:
If you want to use the 4 cylinder spindles you can get a set of 83-88 ranger 4 cylinder rotors. You will have to change the races but they can be use from the mustang rotors.
Click to expand...

I just did this recently. Use the ranger 4 cylinder rotor with a 1970 mach1 inner bearing and race and the 4 cylinder mustang outer bearing and race.
 
You must log in or register to reply here.
Back
Top