4.6 PI SOHC long block, Comp Cams, LT's etc

Mizark347

Mizark347

Forum Member
I have a 4.6 SOHC motor that I just pulled from an 02' Mustang GT. It has 76,xxx miles on it and is the original rotating assembly and PI heads with the addition of Comp XE270-AH cams that I purchased and installed fully degreed in with Trick flow crank sprockets at 68,xxx miles. The motor will also come with Flowtech long tube headers and PI intake with aluminum crossover for the right price. I also have Miscellaneous parts such as injectors, flexplate, BBK upper intake elbow etc. The motor is kinda dirty but ran awesome before it was pulled for a forged motor. Perfect for 96-98 non-pi cars wanting more power. Asking $1000 for everything. (248) 376-4627
Or
$400 for cams only,
$460 for cams with cam gears and adj. trick flow crank sprocket fully degreed in at 112.5 intake center-line to assure adequate piston to valve clearance.
$150 for Flowtech LT headers and home made X-pipe,
$650 for long block w/out cams,
 
Last edited:
The cams are still in the motor because they're degreed in and don't want to remove unless I have a buyer. Iv'e been working on mod motors for a long time and the Cams have normal wear marks on the lobes and journals.





 
Cams pending sale.

2002 4.6 2 valve long block part out:

1) PI heads complete $250
2) BBK upper intake $75
3) PI intake w/ aluminum crossover $100
4) Flowtech Longtube headers $100
5) Assembled shortblock $350

Chains,cam gears, guides, sprockets, tensioners and misc parts all OBO
 
What motor replaced this one? I have the same cams and love them in my 4.6, im on a stock block and have been looking into a built lower end
 
A 4.6 Teksid block with an 03/04 cobra rotating assembly replaced this motor. I'm still in the tuning process though.
 
You must log in or register to reply here.
Back
Top