I'm selling the 383 out of my 95 z to make room and money for the new turbo ls1 project.
Engine specs
Eagle 4340 3.750 crank
Eagle 4340 6 inch h beam rods with arp l19 bolts
SRP 5cc flat top pistons
Speed pro PM rings
Clevite bearing in main,rods and cam
ATI Damper and zero balance 153 tooth flex plate
Block
.030 bores honed with deck plates and opened up for nitrous
9 Inch deck
Pro gram 4 bolt main caps
ARP Main Studs
Valvetrain
Trick Flow heads ported my Lloyd Elliott
Heads and intake are ported to a lt4 race gasket.
2.08/1.625 Ferrea 6000 valves
Comp Cams 977 spring
Comp Cams 730 10 degree titanium retainers
Comp Cams 611 valve locks
Comp Cams Magnum 1.6 Roller rockers with ARP 7/16 studs
Comp Cams Magnum Pushrods
OEM lifters but i have to set of Comp R's I will give with it
Comp Cam by Sean Collins
ARP Head studs
Cloyes double roller timing chain
Other parts
Holley 58 mm throttle body
CSR water pump
New opti spark
New starter
MSD plug wires
SVO 30 lbs injectors
Aeromotive lt1 fuel pressure reg.
Melling 55 oil pump with high pressure spring
Milodon pump pick up
Milodon 7 qt oil pan
I'm sure there is stuff i can't think of right now so if you have any questions feel free to ask. I'm looking for $6500 O.B.O. I am in south eastern Michigan and can meet up with the buyer if need be. Also if someone needs it i can add the computer and harness for a little extra.
Engine specs
Eagle 4340 3.750 crank
Eagle 4340 6 inch h beam rods with arp l19 bolts
SRP 5cc flat top pistons
Speed pro PM rings
Clevite bearing in main,rods and cam
ATI Damper and zero balance 153 tooth flex plate
Block
.030 bores honed with deck plates and opened up for nitrous
9 Inch deck
Pro gram 4 bolt main caps
ARP Main Studs
Valvetrain
Trick Flow heads ported my Lloyd Elliott
Heads and intake are ported to a lt4 race gasket.
2.08/1.625 Ferrea 6000 valves
Comp Cams 977 spring
Comp Cams 730 10 degree titanium retainers
Comp Cams 611 valve locks
Comp Cams Magnum 1.6 Roller rockers with ARP 7/16 studs
Comp Cams Magnum Pushrods
OEM lifters but i have to set of Comp R's I will give with it
Comp Cam by Sean Collins
ARP Head studs
Cloyes double roller timing chain
Other parts
Holley 58 mm throttle body
CSR water pump
New opti spark
New starter
MSD plug wires
SVO 30 lbs injectors
Aeromotive lt1 fuel pressure reg.
Melling 55 oil pump with high pressure spring
Milodon pump pick up
Milodon 7 qt oil pan
I'm sure there is stuff i can't think of right now so if you have any questions feel free to ask. I'm looking for $6500 O.B.O. I am in south eastern Michigan and can meet up with the buyer if need be. Also if someone needs it i can add the computer and harness for a little extra.
Last edited: