SuperStang90
Club Member
I have a big bore 347 shortblock for sale, built for a turbo application.
-FRPP 8.2 deck Boss Block
-4.125 bore Diamond Pistons custom dish yielded 10.25:1 static compression with a 58cc combustion chamber head
-total seal AP steel top ring with Napier 2nd
-H-13 tool steel pin upgrade
-Eagle H beam Rods with ARP 2000 bolts
-Eagle forged crank 3.25 stroke
-ARP main studs
-ARP head studs
-zero balance motor will
Include pro products balancer
-canton 7 qt pan and mellowing pump can go with motor as well
-rollmaster Torrington cam chain and gears
Motor has about 10-15 1/8 mile passes and less than 100 street miles, bearings look good. Shortblock is assembled minus the cam. Decided that I want to go with a 9.5 deck motor. I also have another set of dome Pistons that can be included to make a nitrous setup (would have to be rebalanced)
8103385305
Looking for $3000 for the shortblock
-FRPP 8.2 deck Boss Block
-4.125 bore Diamond Pistons custom dish yielded 10.25:1 static compression with a 58cc combustion chamber head
-total seal AP steel top ring with Napier 2nd
-H-13 tool steel pin upgrade
-Eagle H beam Rods with ARP 2000 bolts
-Eagle forged crank 3.25 stroke
-ARP main studs
-ARP head studs
-zero balance motor will
Include pro products balancer
-canton 7 qt pan and mellowing pump can go with motor as well
-rollmaster Torrington cam chain and gears
Motor has about 10-15 1/8 mile passes and less than 100 street miles, bearings look good. Shortblock is assembled minus the cam. Decided that I want to go with a 9.5 deck motor. I also have another set of dome Pistons that can be included to make a nitrous setup (would have to be rebalanced)
8103385305
Looking for $3000 for the shortblock
