2010 Taurus HVAC

mikeg

mikeg

Club Member
I have dual zone climate control. Problem is that the passenger side is stuck all the way on cold, which sucks now that it's getting cold out. I need to know what controls this and where it is located.
 
Ok, I took out the wrong blend door actuator. I guess there is 2 down there, one that is easy to get to and one that is hard to get to. I checked the one that was easy to get to but that one only adjusted if the air went to the floor, dash or defrost, and it worked fine. Guess I'll dive back under my dash and see if I can find the other one. Thanks.
 
From what I understand there are 4 in the tore ass. I checked my sho last weekend, remove the glovebox and two are clear as day. As I understand the other two are above the pedals and not as easily accessible.

Easy one is directly below the cabin filter, other is directly to the left.
 
Low and behold, one day after posting this my passenger side is out, only cold air. Read online that a 15 min battery disconnect may also fix it. Going to try this before buying a new part tomorrow
 
Unplugging and rep lugging the battery for 15 minute just worked for me. But I'm not happy with the air flow out of the passenger side now. It seems to be a lot less, but now I've got hot and cold on both sides with no replacement parts.
 
You must log in or register to reply here.
Back
Top