2007 ford fusion front wheel bearing replacement

Billydroveit

Billydroveit

Club Member
ok how hard is it to replace the front wheel bearing on a 07 fusion. I see by google searching they are prone to failure, and have a friend with one toasted. Will i need a press, or is it a hub assembly? While working at Ford in Dearborn i think this is the only hub bearing i never had to replace...lol

Thanks for any help fellas...
 
Billydroveit said:
ok how hard is it to replace the front wheel bearing on a 07 fusion. I see by google searching they are prone to failure, and have a friend with one toasted. Will i need a press, or is it a hub assembly? While working at Ford in Dearborn i think this is the only hub bearing i never had to replace...lol

Thanks for any help fellas...
Click to expand...

Do you still need this info? If so, PM me with your email address and I will send you the 12 page procedure (I'm not joking, 12 pages.) I bet you could use a "hub tamer" and save A LOT OF WORK.
 
braxx said:
Do you still need this info? If so, PM me with your email address and I will send you the 12 page procedure (I'm not joking, 12 pages.) I bet you could use a "hub tamer" and save A LOT OF WORK.
Click to expand...

Josh,
Do you still have access to the 12 page procedure for changing the front wheel bearing on an 07 Fusion?
I am fixin to do both driver and passanger on my 07 V6 SE Fusion. This is my first reply or post on the motown forum. Thanks for your time.
 
I'm sorry that I just saw this.
Do you still need the info?
If so, send me a private message with your email address.
FYI, there are awesome special tools out that let you replace the bearing while the knuckle stays on the vehicle. They save a lot of time. The 12 page procedure I can give you is the LONG way of doing it but you would still need a press to remove the hub and bearing after you remove the knuckle.
I personally use the OTC hub grappler and I don't have to remove the knuckle from the vehicle.
Porky said:
Josh,
Do you still have access to the 12 page procedure for changing the front wheel bearing on an 07 Fusion?
I am fixin to do both driver and passanger on my 07 V6 SE Fusion. This is my first reply or post on the motown forum. Thanks for your time.
Click to expand...
 
You must log in or register to reply here.
Back
Top