2000 Z28 with Built LS1

[Briggs248]

Posting this for my really good friend Aaron... he doesnt have a computer at the time.
asking 14k obo or trades

Cars a turn key low 12 second car. It was built by a Tc and a few other guys on here, and they did it right. Car has never given Aaron any problems, car is very quick and ill be sad to see it go.



Ran 12.4 at 116 spinning the drag radials bad with a 2.6 60'
It has 20k on the fresh build
Bored .030 over
Balanced
11.5:1 Mahle
Eagle H-Beam Rods
Patriot Heads
Lunatti .224/224 cam
SLP Lid
42# Injectors
Pacesetter Longtubes
Open y-pipe
(comes with SLP catback)
Spec stage III clutch
B&M Short Throw shifter
Drag Radials

It comes with a 90mm FAST throttle body (not installed)
It's tuned pig rich and it made 367rwhp and 360ft lbs on a Mustang Dyno.
It runs super strong, just needs a throttle body/intake/larger cam and it will run 11's no doubt.
diamond pistons

Aaron 248-227-1282

 

[VTRauder]

price? :dollar: :boobies:

 

[Briggs248]

14k obo

 

[deviate]

miles

 

[deviate]

also, it trapped 116 and went 12.4 all stock except lid? more has to be done

 

[Quick86]

What kind of trades?

 

[Briggs248]

also, it trapped 116 and went 12.4 all stock except lid? more has to be done

I am getting th spec sheet from Aaron tomorrow I know its got higher compression with the supporting mods.

 

[1BadSn95]

this car went 12.4 with a lid and some pistons?

 

[The Man]

actually, no there doesnt. Its not unheard of before, ask Quasar.

also, it trapped 116 and went 12.4 all stock except lid? more has to be done

 

[slowneon]

this is me babying it... (I break enough cars)

[ame="http://www.youtube.com/watch?v=jfDnieyygPI"]YouTube - z28[/ame]

 

[Jenga]

this is me baby it... (I break enough cars)

YouTube - z28

WTF are we supposed to gain from that video? Your car sounds decent?

 

[slowneon]

WTF are we supposed to gain from that video? Your car sounds decent?

WTF is this thread supposed to gain by your post?

It's not my car.

 

[1BADAIR]

It has 20k on the fresh build
Bored .030 over
Balanced
11.5:1 Mahle
Eagle H-Beam Rods
Patriot Heads
Lunatti .224/224 cam
SLP Lid
42# Injectors
Pacesetter Longtubes

you can't bore a ls1 .030 over

 

[90_Notch]

you can't bore a ls1 .030 over

I was thinking that same thing. isn't .20 the most on those?

 

[1BADAIR]

.010 on a 99+ ls1
stock is 3.898
most go to 3.903 or 3.905

 

[90_Notch]

.010 on a 99+ ls1
stock is 3.898
most go to 3.903 or 3.905

Got yea. I knew it couldn't be .30. I didn't know the max. I was talking to someone just the other day about LS1 motors and he was explaining some stuff to me about the LS1 stuff and boring them out.

 

[1BADAIR]

the iron 6.0,ls2 ls3, l92 can be bored more
Think the 5.3 can go .020