2000 ram 4x4 help

foxbodydave

Club Member
is there a fuse or relay for the 4wd on the 2000 rams? its a 1500 and when we pull the t case back into 4hi, nothing is happening. it went into 4wd 1 time for about 2 secs and then nothing. any help would be fantastic:cheers:
 
just wiggle it then it goes in.

my old ram truck did the same exact thing.


its a common problem in those. its the shifter that sux
 
+1 on the vacuum lines. If for some reason you decide to remove the actuator from the axle tube, have a drill and tap on hand, along with new bolts, because they tend to break off in the housing.
 
Back
Top