brian_king25
Forum Member
Ok here is the list of Mods! Before anyone get mad it had several mods before I got it 6 Years ago. I just went a bit overboard this summer after pushing a head gasket!
Motor Specs:
402 LS with Eagel Rods and Crank
Thunder Racing heads - Just redone for the FI Build
9.5 to 1
Suspension Mods:
BMR Tubular K Member and A arms
BMR Remote Mount TQ Arm
BMR weld in Frame Conectors
QA1 12 Way adjustable Shocks
Power Adder:
F1A Procharger
10LBS of Boost
Front Mount Intercooler
Aster Procharger Mounting Bracket - Added to Eliminate Belt Slip - Works Great
Fuel System:
Lonnie's Performance Twin IN Tank
-8 Fuel Line and -6 Return
85LBS INjectors
Fuel Lab Reg
Trans:
4L80
TCI Trans Controller
Yank 3600 Conv.
Rearend:
DTS 12 Bolt
New Seals
3.73 Gears
All parts have 4 Dyno Pulls and Less then 100 mile: Car has Less then 24K total miles
Car Made 705 RWHP on 93 Pump Gas! ALso has new Drilled and sloted rotors, Hawk Pads, Bogart D10 Rims with new 275 DR, Texas Speed 1 7/8 Headers, Customer y Pipe with cutout and a 8 Point Cage. Please note There is no air.Sure I am missing some stuff. Car is so much fun! I am selling it to buy a new toy for the water!
Here is a viedio of the 1st Dyno pull. Short but you will get the ideal!
http://www.youtube.com/watch?v=nTK0TdXwHbU
Asking 27,500
Motor Specs:
402 LS with Eagel Rods and Crank
Thunder Racing heads - Just redone for the FI Build
9.5 to 1
Suspension Mods:
BMR Tubular K Member and A arms
BMR Remote Mount TQ Arm
BMR weld in Frame Conectors
QA1 12 Way adjustable Shocks
Power Adder:
F1A Procharger
10LBS of Boost
Front Mount Intercooler
Aster Procharger Mounting Bracket - Added to Eliminate Belt Slip - Works Great
Fuel System:
Lonnie's Performance Twin IN Tank
-8 Fuel Line and -6 Return
85LBS INjectors
Fuel Lab Reg
Trans:
4L80
TCI Trans Controller
Yank 3600 Conv.
Rearend:
DTS 12 Bolt
New Seals
3.73 Gears
All parts have 4 Dyno Pulls and Less then 100 mile: Car has Less then 24K total miles
Car Made 705 RWHP on 93 Pump Gas! ALso has new Drilled and sloted rotors, Hawk Pads, Bogart D10 Rims with new 275 DR, Texas Speed 1 7/8 Headers, Customer y Pipe with cutout and a 8 Point Cage. Please note There is no air.Sure I am missing some stuff. Car is so much fun! I am selling it to buy a new toy for the water!
Here is a viedio of the 1st Dyno pull. Short but you will get the ideal!
http://www.youtube.com/watch?v=nTK0TdXwHbU
Asking 27,500
lol Sounds mean!