1990 Mustang...
- Thread starter ReiKo
- Start date
ReiKo
New member
:dunno:
ReiKo
New member
More progress and pics...
The cage is 100% completed...
Few underside shots...
Seat brackets...
The pro stock column uses the factory mounting so if the colum ever needs to be removed it can be without problem... Also has removeable wheel...
Intercooler mounted... We decided to put it in the rear right to help balance the car out...
Rear end has a tie down hook on it now... Wheelie bar mounts will be fabricated shortly...
Rear wheel area trimmed...
New tin work on the floor...
Dual Rear Caliper brackets...
Motor mounts getting mocked up... And mid plate...
The cage is 100% completed...
Few underside shots...
Seat brackets...
The pro stock column uses the factory mounting so if the colum ever needs to be removed it can be without problem... Also has removeable wheel...
Intercooler mounted... We decided to put it in the rear right to help balance the car out...
Rear end has a tie down hook on it now... Wheelie bar mounts will be fabricated shortly...
Rear wheel area trimmed...
New tin work on the floor...
Dual Rear Caliper brackets...
Motor mounts getting mocked up... And mid plate...
ReiKo
New member
Thanks... Going to need you for a few things soon... :gossip:
twofast4you
Forum Member
Looks good Reiko. Looks like some thought was put into it.
ReiKo
New member
Thanks
Had some serious help from you know who... :thumbsup:
:gossip:
orangejuiced86
Club Member
Looks great!
1BADAIR
Club Member
think he is asking about the metal piece bolted in in the 2nd pic on post 315
ReiKo
New member
It's a part of the seat bracket... There's a plate welded on the underside so you can bolt it right to the plate that's welded to the trans tunnel...
P.F.M.
Club Member
dante1120
Forum Member
probaly some noooooob:headscrat:sagrin:
