CitoCoupe
Forum Member
1988 LX Convertible
Car has been 9.20 at 147mph
-6 point roll bar
-Mini Tubbed and Narrowed 8.8 with 33 spline axles 3.73 with a spool
-HPM upper ans lower control arms, skinny kid Anti-sway bar
-Stange coil over rear shocks
-QA-1 Front Struts and Coilovers, UPR Caster Cambers
-Willwood Drag Brakes Front and Rear
-Flofit Back Sport Seats
-D and D Tubuler K-member ans control arms
-Factory Fuel tank with pickup and Aeromotive fuel System
-Engine
-A-4 Race block 4.025
-Moldex 4340 crank 3.0 stroke internal balance
-Eagle rods with bolt upgrade
-Ross custom pistons
-Ron Sharp custom solid roller cam for boost
-compcams solid rollers and rockers , jomar girdle, sheetmetal covers
- AFR 225 CNC by Rousch 340I/240E with badass springs for boost
-ATI super damper with custom crank trigger system
-Canton Drag Pan
-Reactor flexplate
-TFS R lower intake with Vortech Igloo intercooler & 75 mm Accufab TB
-83 # injectors with vortech fuel rails
-Trans Powerglide 1.76 gearset by Joel's all good stuff with ati brake and JW
bell and Coan 9" covertor with Vasco input
-Dynotech driveshaft
-Complete water/ice coolant system with tank in trunk
-Superior 2 row aluminum radiator with custom fan setup
-Paxton Novi 2000 blower with cogs and 8 rib with vortech mondo blow
off valve, made 27 psi
-Fast XFI Fuel injection system with indivual control sequential and wide
band and internal data logger.
16,500 or best or break it up Felix 734-216-5477 or [email protected]
Car has been 9.20 at 147mph
-6 point roll bar
-Mini Tubbed and Narrowed 8.8 with 33 spline axles 3.73 with a spool
-HPM upper ans lower control arms, skinny kid Anti-sway bar
-Stange coil over rear shocks
-QA-1 Front Struts and Coilovers, UPR Caster Cambers
-Willwood Drag Brakes Front and Rear
-Flofit Back Sport Seats
-D and D Tubuler K-member ans control arms
-Factory Fuel tank with pickup and Aeromotive fuel System
-Engine
-A-4 Race block 4.025
-Moldex 4340 crank 3.0 stroke internal balance
-Eagle rods with bolt upgrade
-Ross custom pistons
-Ron Sharp custom solid roller cam for boost
-compcams solid rollers and rockers , jomar girdle, sheetmetal covers
- AFR 225 CNC by Rousch 340I/240E with badass springs for boost
-ATI super damper with custom crank trigger system
-Canton Drag Pan
-Reactor flexplate
-TFS R lower intake with Vortech Igloo intercooler & 75 mm Accufab TB
-83 # injectors with vortech fuel rails
-Trans Powerglide 1.76 gearset by Joel's all good stuff with ati brake and JW
bell and Coan 9" covertor with Vasco input
-Dynotech driveshaft
-Complete water/ice coolant system with tank in trunk
-Superior 2 row aluminum radiator with custom fan setup
-Paxton Novi 2000 blower with cogs and 8 rib with vortech mondo blow
off valve, made 27 psi
-Fast XFI Fuel injection system with indivual control sequential and wide
band and internal data logger.
16,500 or best or break it up Felix 734-216-5477 or [email protected]
Attachments
Last edited:
