PURESTREET5006
Forum Member
1985 Mustang GT rolling Chassis Purestreet car* PIC'S INSIDE* F/S
THIS CAR IS LOCATED IN ILL AREA*
Body:
1. Clean 1985 GT painted '95 ZR-1 blue( No rust)
2. Aluminum " rear " wing ( southern outlaw )
3. Cervini 4 inch cowl hood w/hood pins( used stock hood hindges)
4. Harwood smooth cowl replacement panel
Interior * ALL INTERIOR PANELS ARE THERE AND IN GOOD CONDITION *
1. 8 point Mild steel ) roll bar * Painted ZR-1 blue * cert 10.00
2. Extra moly bars added to support upper torque boxes and lower kick bar supprt...
3. Fabricated weight bars(4) 70LBS over rear tires, 150 under rear bumper, 20 x2 on rear kick out bars
4. Jaz race seats(2) with jaz covers & 5 way harness( good til 6/2012) & rear upper seat supprt( NHRA MANDITORY)
5. All original 1985 dash equipment( 140 speedo )
6. Grant 3 Spoke steering wheel * I also have the original 85 steering wheel *
chassis/Rear suspension:
1.UPR rear upper & lower( UPRmoly) adjustable control arms
2. UPR Anti- rollbar
3. Qa1 rear adjustable 12 way shocks
4. Rear GT coil springs
5. Wildrides battlebox upper & lower torqur box installed
6. Thru the floor subframe connectors boxed steel ties in the rollbar and subframe.
Chassis/ Front Suspension:
1. UPR Moly K- member w/ UPR control arms
2. Steeda bump steer kit
3. Lakewood 90/10 struts
4. UPR coilover kit with 14 inch/ 130 lbs springs
6. Flaming river manual steering rack
7. Flaming river steering shaft
Fuel System:
1. Aeromotive A1000 Fuelpump( 1 season old )
2. Aeromotive fuel regulator # 13204
3. Sumped " stock" tank with 1/2 inch fittings( only race fuel in this tank since new)
4. -10 fuel suppy line
5. -6 fuel return line
6. Aeromotive fuel sample valve
7. -6 dual feed carb lines
8. * ALL FITTINGS ARE AEROQUIP
ELETRONICS
1. MSD digital 7 box( 7520) mounted in the car
2. MSD 8251 red coil
3. AutoMeter gauges(silverlite) Oil, Water, and Fuel
4. Autometer Tach # 6883
5. Taylor battery box mounted in rear with optima yellow top battery
Rearend :
1. Stock 8.8 with welded tubes & stock rear brakes
2. Strange gun drilled axles 33 spline ( 4 lug) with studs
3. Strange spool 33 spline & C-clip eliminators
4. Motive gear AX series 4.88 gear installed & 5.13 gear * NIB *
5. T/A Rearend girdle
Wheels & Tires
1. Weld Draglites 15x10 rear & 15x3.5 front
2. M/T ET Drags 26x10 3052( S )
Drivetrain
1. Aluminum Driveshaft.
Cooling:
1. 3 Row brass radiator with 94 mustang V8 electric fan.
All lights work on this car....Best 60FT was 1.39
This car was also in 5.0 mustang in 2006 from the Martin Mi race( NMRA) and in a few NMRA racepages as well...
Asking 5500.00 OBO on this car but i will intertain reasonable offers
You can contact me at 773-225-5455.. Can email pic's on request
Thanks! Darrin
THIS CAR IS LOCATED IN ILL AREA*
Body:
1. Clean 1985 GT painted '95 ZR-1 blue( No rust)
2. Aluminum " rear " wing ( southern outlaw )
3. Cervini 4 inch cowl hood w/hood pins( used stock hood hindges)
4. Harwood smooth cowl replacement panel
Interior * ALL INTERIOR PANELS ARE THERE AND IN GOOD CONDITION *
1. 8 point Mild steel ) roll bar * Painted ZR-1 blue * cert 10.00
2. Extra moly bars added to support upper torque boxes and lower kick bar supprt...
3. Fabricated weight bars(4) 70LBS over rear tires, 150 under rear bumper, 20 x2 on rear kick out bars
4. Jaz race seats(2) with jaz covers & 5 way harness( good til 6/2012) & rear upper seat supprt( NHRA MANDITORY)
5. All original 1985 dash equipment( 140 speedo )
6. Grant 3 Spoke steering wheel * I also have the original 85 steering wheel *
chassis/Rear suspension:
1.UPR rear upper & lower( UPRmoly) adjustable control arms
2. UPR Anti- rollbar
3. Qa1 rear adjustable 12 way shocks
4. Rear GT coil springs
5. Wildrides battlebox upper & lower torqur box installed
6. Thru the floor subframe connectors boxed steel ties in the rollbar and subframe.
Chassis/ Front Suspension:
1. UPR Moly K- member w/ UPR control arms
2. Steeda bump steer kit
3. Lakewood 90/10 struts
4. UPR coilover kit with 14 inch/ 130 lbs springs
6. Flaming river manual steering rack
7. Flaming river steering shaft
Fuel System:
1. Aeromotive A1000 Fuelpump( 1 season old )
2. Aeromotive fuel regulator # 13204
3. Sumped " stock" tank with 1/2 inch fittings( only race fuel in this tank since new)
4. -10 fuel suppy line
5. -6 fuel return line
6. Aeromotive fuel sample valve
7. -6 dual feed carb lines
8. * ALL FITTINGS ARE AEROQUIP
ELETRONICS
1. MSD digital 7 box( 7520) mounted in the car
2. MSD 8251 red coil
3. AutoMeter gauges(silverlite) Oil, Water, and Fuel
4. Autometer Tach # 6883
5. Taylor battery box mounted in rear with optima yellow top battery
Rearend :
1. Stock 8.8 with welded tubes & stock rear brakes
2. Strange gun drilled axles 33 spline ( 4 lug) with studs
3. Strange spool 33 spline & C-clip eliminators
4. Motive gear AX series 4.88 gear installed & 5.13 gear * NIB *
5. T/A Rearend girdle
Wheels & Tires
1. Weld Draglites 15x10 rear & 15x3.5 front
2. M/T ET Drags 26x10 3052( S )
Drivetrain
1. Aluminum Driveshaft.
Cooling:
1. 3 Row brass radiator with 94 mustang V8 electric fan.
All lights work on this car....Best 60FT was 1.39
This car was also in 5.0 mustang in 2006 from the Martin Mi race( NMRA) and in a few NMRA racepages as well...
Asking 5500.00 OBO on this car but i will intertain reasonable offers
You can contact me at 773-225-5455.. Can email pic's on request
Thanks! Darrin
Attachments
![IMG_8139[1].jpg](/data/attachments/30/30462-0b46c1fb9cbf7b4ebc2194382ff835d0.jpg?hash=7oKn1R_2qv)
![IMG_0145[1].jpg](/data/attachments/30/30463-be407e614004d312dd8c1010813015ef.jpg?hash=vvD618XHaX)
Last edited:
