1985 iroc with big block

Duke901

Forum Member
Its a 60 over 427 11.5 comp with a 595 lift soild cam, 781 heads 2.19 1.88 valves, full comp valve train, torker 2 intake, holley 800 carb, and a msd 6a box. It has a turbo 350 trans and a 3600 stall converter. also has a full tubular k member and a arms. The trans cross member and torque arm are also tubular. The car does run and move just needs work.Its still a project. The block did have a crack on the side of it that i used block sealer on. I dont want to get rid of it but with the way things are going i would rather have extra back up cash. I will also throw in a extra 700r4 trans. Im looking to get $3000 obo but willing to work out a deal. thank you
iroc.jpg

0527081417a.jpg

0528081156a-1.jpg

0528081157-1.jpg

iroc2.jpg

newpics2.jpg

newpics.jpg

newpics3.jpg
 
Last edited:
There are no back seats, Im not to sure if i still have them somewhere, also there is some rust around the windshield. Good start for someone or could finish it up, It needs a radiator. The stock one cant keep it cool and needs the catch can installed.
 
more info=
a hole was cut open for the fuel pump that wasnt done to well. these are the other things it needs. If there are other things i can think of i will add them. The car is a project and needs some work.

lug nuts
radiator
over flow hooked up
power steering hooked up if you want it
alignment
carb adjusted
cooling fan wired up
ball joints greased
might need brakes.
 
you had a trans am right? me and friend bought it from you i think.thats the camaro you had in the garage?and your trying to sell it now.man you better keep it thats to nice of a car to part with.especially since you almost have it done.
 
K & W block sealer, i picked it up at napa. Im not sure how it got cracked. I bought the shortblock from a guy that said he built it and didnt need it anymore. Said that it was never ran. So then i bought it brought it home and it sat inside on a stand for a couple months and then put it together. Then i started it up and seen that it leaked. So i used the block sealer.
 
Last edited:
Back
Top