monster.
Club Member
1981 Cobra (Texas & San Diego car) :: VERY SOLID very very little surface rust
Original doors
Original hatch
Original PAINT & DECALS
Body has 65,685 original miles
306 (1986 block + .030) - maybe 500 miles since build
Wiesco forged pistons
Eagle I-beam rods
Stock crank polished
351 D00E heads (machined with screw in studs)
1.6 roller tip rockers
B303 camshaft
Edelbrock performer RPM intake
Stock distributor
Duraspark
Holley 750CFM vacuum secondaries (milled choke horn off)
MAC long tube headers
MAC offroad H-pipe
Flowmaster 2-chambers (I also have new stainless tail pipes with new hangers)
C4 trans (recent rebuild)
stock shifter
stock 7.5 rearend
Monroe Senstrac (front & rear)
Eibach drag launch front springs
Stock 4-cylinder rear springs
Unisteer manual steering rack & solid steering shaft
Weld Draglites (15x9 & 15x3.5)
BFG Radials (275/60R15 & 155/80R15)
also have a set of Enkei 92 16x8 with I think they are 225/50R16 BFG
Interior needs to be finished
Extra parts included
Black dash
Center console with info-center
OEM black dash pad (very nice no cracks)
Black door panels
LS Recaro seats
Rear seat back and bottom and hardware
boxes of other do-dads
Car runs and drives good, nice cruiser. Good start to the project, i'm flexible on price - email me if you are interested and we can set up a showing.
Thank you!
David
Original doors
Original hatch
Original PAINT & DECALS
Body has 65,685 original miles
306 (1986 block + .030) - maybe 500 miles since build
Wiesco forged pistons
Eagle I-beam rods
Stock crank polished
351 D00E heads (machined with screw in studs)
1.6 roller tip rockers
B303 camshaft
Edelbrock performer RPM intake
Stock distributor
Duraspark
Holley 750CFM vacuum secondaries (milled choke horn off)
MAC long tube headers
MAC offroad H-pipe
Flowmaster 2-chambers (I also have new stainless tail pipes with new hangers)
C4 trans (recent rebuild)
stock shifter
stock 7.5 rearend
Monroe Senstrac (front & rear)
Eibach drag launch front springs
Stock 4-cylinder rear springs
Unisteer manual steering rack & solid steering shaft
Weld Draglites (15x9 & 15x3.5)
BFG Radials (275/60R15 & 155/80R15)
also have a set of Enkei 92 16x8 with I think they are 225/50R16 BFG
Interior needs to be finished
Extra parts included
Black dash
Center console with info-center
OEM black dash pad (very nice no cracks)
Black door panels
LS Recaro seats
Rear seat back and bottom and hardware
boxes of other do-dads
Car runs and drives good, nice cruiser. Good start to the project, i'm flexible on price - email me if you are interested and we can set up a showing.
Thank you!
David
Last edited:
