SOLD 1979 Ford Bronco Project, 460 cid speed density
I'm looking to sell or possibly trade this Bronco. I got this as a project, but I haven't had the time to do it justice. The vehicle must be towed, and you'll probably need a winch to pull it onto a flatbed.
Location: Livonia, MI
Contact: via messenger on here (it may take a day or two for me to respond, please be patient) or at 2FOUR8-9EIGHT2-3721, I can provide email if requested
Price: $800 or best offer or possible trade, trades must be running and must something interesting...I'd much rather sell than trade, but you never know
This is a 1979 Bronco with a 460 out of a 1990's F-series truck, the body is near 80k miles and the engine was either 300 or 3000 (so I am told for all of this, no way I can verify). There are tons of parts, here is a partial list:
-nerf bars
-bully bar
-new red carpet
-4-33" tires and alum. Snowflake rims
-1-31" wagon wheel rim and tire (spare)
-Driver floor pan (not installed)
-Used driver side fender (not installed)
-Fiberglass fender flares (not installed) (Bushwhacker)
-2 doors 1 new 1 used
-New tailgate piece
-Center console
-S/S exhaust system in a box
-1990's speed density/fuel injected 7.5 L (460 cid) fuel injected engine - I have the receipt, prior owner paid $1560 for the motor
-Chassis harness w/ 2-processors 1 automatic, 1 manual
-Dash cover
-Urethane bushings and mounts (not installed)
-K&N air filter and air bypass breather
-Grant steering wheel (removable)
-Hood scoop (hole cut in hood)
-Rough rider quad shocks back and front with dual steering stabilizers and covers
-New gas tank skid plate
-Front grill (standard)
...much, much more
The 460 is in place, but not torqued down. Fuel lines need to be run and the ECU needs to be wired up (there are 2 or 3 ECUs to play with). I was told this truck came with a 400 originally.
EDITED: price changed to $800 and number added
I'm looking to sell or possibly trade this Bronco. I got this as a project, but I haven't had the time to do it justice. The vehicle must be towed, and you'll probably need a winch to pull it onto a flatbed.
Location: Livonia, MI
Contact: via messenger on here (it may take a day or two for me to respond, please be patient) or at 2FOUR8-9EIGHT2-3721, I can provide email if requested
Price: $800 or best offer or possible trade, trades must be running and must something interesting...I'd much rather sell than trade, but you never know
This is a 1979 Bronco with a 460 out of a 1990's F-series truck, the body is near 80k miles and the engine was either 300 or 3000 (so I am told for all of this, no way I can verify). There are tons of parts, here is a partial list:
-nerf bars
-bully bar
-new red carpet
-4-33" tires and alum. Snowflake rims
-1-31" wagon wheel rim and tire (spare)
-Driver floor pan (not installed)
-Used driver side fender (not installed)
-Fiberglass fender flares (not installed) (Bushwhacker)
-2 doors 1 new 1 used
-New tailgate piece
-Center console
-S/S exhaust system in a box
-1990's speed density/fuel injected 7.5 L (460 cid) fuel injected engine - I have the receipt, prior owner paid $1560 for the motor
-Chassis harness w/ 2-processors 1 automatic, 1 manual
-Dash cover
-Urethane bushings and mounts (not installed)
-K&N air filter and air bypass breather
-Grant steering wheel (removable)
-Hood scoop (hole cut in hood)
-Rough rider quad shocks back and front with dual steering stabilizers and covers
-New gas tank skid plate
-Front grill (standard)
...much, much more
The 460 is in place, but not torqued down. Fuel lines need to be run and the ECU needs to be wired up (there are 2 or 3 ECUs to play with). I was told this truck came with a 400 originally.
EDITED: price changed to $800 and number added
Attachments
Last edited:
