17" 5 lug mustang wheels

I have an extra with a tire.

17x10 cracked bullitt style wheel (holding air) with a 315/35/17 tire. I wouldnt drive on it. What kind of project?
 
Can you measure the id of the inside of the wheel....so i can see if it would clear my brake caliper
 
Mine are 17x9 and rub a little on the front calipers of my 05 Magnum R/T. I was pretty sure I was going to have to grind on the calipers a little when I bought the rims.

I can measure when I get home but it will just be with a tape measure. If you don't hear from me by 7, shoot me a text or a call to remind me.

Dennis

734 306 9059
 
image.jpgThe ID is about 16", but it necks down about 3/8" near the front edge of the caliper. That is where mine are rubbing.

I work in Rochester Hills and could bring one in if you wanted to meet up and borrow it. My car isn't going anywhere soon under its own power.

Dennis
 
Looks like the narrowest part of the barrel that is inline with the wheel to hub mounting face is 15 3/8" diameter. It gets a bit smaller as it gets closer to the spokes so there would be even less room for the caliper/caliper bracket.
 
Dline, I see you are by Lakeside. I drive by there most week days on my way home from work. I can drop my extra wheel/tire off if you need it
 
You must log in or register to reply here.
Back
Top