Recent content by gols1go

Throttle cable ordered today. It looks just like the Lokar cable to me. Got it on Ebay for $18. Here's the link to it if anyone needs a nice universal throttle cable for a reasonable price...

Here's a few shots with the rims mounted. I still need to get the exhaust hooked up and the throttle cable and bracket worked out before I can take her on the road!!! I could use some paint bad!

I got a set of 18" Zenetti's off Craigslist that were all white, then had them painted black with a red lip. Next I put some Vette decals on them and 6.0L badges where the original 5.0 bagdes went. No mistaken this for a sbf!!!

I picked up a set of spindles, calipers, and rotors from a SN95 for my front 5 lug setup. I also got a set of 5 lug rear axles. The drums are for a late 80's Ranger since they retain the same brake setup. In the future I plan on adding rear disc brakes. I also did a coilover kit up front with...

I picked up a new AJE k member for $150, but it was the older style eith the fixed motor mounts. Next, I used 4.6l Mustang mounts, made a cheater plate to mount them to the 6.0l, and used this setup to mount the engine to the k frame. ]

Here is some pics of how I made the 351 headers fit the LS heads. I cut off the Ford flanges, and just welded on the LS flanges. That simple. Since these were for a 351 into a foxbody, they were made so that the steering shaft goes between two primaries. This was perfect and I didn't have to...

For some reason the site will not let me upload any photos. Soon as it does I plan on posting more pics of the car and build. EDIT: Now that I can post pics, here is some of the car before I bought it And here is one of the freshly rebuilt short block going in

Next I got this crazy idea to port my heads. I say crazy because the L92's already flow over 300 cfm @ .600, but I just had to see if I could squeeze a bit more out. From what I researched, this is really effective for larger cubed motors, but I hope to stroke it in the future. I hand proted...

Here's another LSX Notch build. I scored a 86 fox last fall for a few bucks. It already had subframe connectors welded in, a Walboro 255 in tank, 4:10's out back, and a set of Flow's with a h-pipe. He also sold me some 351w fox headers that I took and cut the Ford flanges off and welded on the...